CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Passed Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Passed Event 101 - 200 of 2492, Sorted by Start Date:

May, 2016
April, 2016
  • Using Thermal Simulation to Address Challenges in Electronics
    Workshop, Courtyard San Diego Sorrento Valley, San Diego, United States, April 28, 2016

    This workshop will show how detailed CFD simulation and design exploration can reveal secrets of system performance and enable robust system design, so you, the design engineer, can produce better designs, faster. The tools and techniques that will be discussed apply whether your design work focuses on component, board, or system design.

  • AxCYCLE S-CO2 Cycles - Online Training Course
    Online Event, April 26, 2016

    4 Day online training courses on AxCYCLE S-CO2 Cycles

  • Using Thermal Simulation to Address Challenges in Electronics
    Workshop, Courtyard Palo Alto Los Altos, Los Altos, United States, April 26, 2016

    This workshop will show how detailed CFD simulation and design exploration can reveal secrets of system performance and enable robust system design, so you, the design engineer, can produce better designs, faster. The tools and techniques that will be discussed apply whether your design work focuses on component, board, or system design.

  • Modeling Complex Motions and Simulating Reality with Overset Mesh
    Online Event, April 21, 2016

    This webinar will provide an overview of the Overset Mesh process and will cover various applications that can benefit from this approach. The presenter will discuss the workflow and will show practical examples illustrating the usage of this powerful technology.

  • Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
    Workshop, Courtyard Boston Cambridge., Cambridge, United States, April 21, 2016

    Join us for this engineering workshop where we will present the value of bringing CFD into your engineering process and show the key capabilities of STAR-CCM+ for fluid flow and heat transfer problems. We'll also give you the opportunity to work with the software in our hands-on session at the end of the day.

  • Join our free, live, online Rotor Dynamics Training Course Preview & Short Lecture
    Online Event, April 21, 2016

    Rotor Dynamics Training Course Preview & Short Lecture, on April 21st 10 am EST.

  • Aerospace Fuel System Modeling - Part 3: Advanced Tanks, Venting & Inerting
    Online Event, April 21, 2016

    Learn how to model advanced fuel venting and inerting systems in Flowmaster.

  • ERCOFTAC O&G - Modelling & Simulation: Best Practice & Tech Trend - 21-22 April 2016, Kongsberg, Oslo, Norway
    Seminar, Kongsberg OGT, Asker-Oslo, Norway, April 20, 2016

    Considering current oil prices, that languish between 2 bands, shale gas - upper band, and middle east oil - lower band, the aim of the seminar is to support the digital agenda forward, with a view to operational excellence(safety, efficiency, and profitability). This is where CFD-FEM has even more a huge role to play. The seminar will focus on modelling and simulation advances in: Multiphase Flows, Real-Time Sims, Risk and Safety, Subsea Ops, and Machine Design.

  • AxSTREAM Training Workshop
    Course, Baarerstrasse 2 – 6300 , Zug, Switzerland, April 20, 2016

    3-Day Training Workshop for Professional Designers - April 20- 22, 2016

  • Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
    Workshop, Courtyard Fort Meade BWI Bus. Dist., Annapolis Jct., United States, April 19, 2016

    Join us for this engineering workshop where we will present the value of bringing CFD into your engineering process and show the key capabilities of STAR-CCM+ for fluid flow and heat transfer problems. We'll also give you the opportunity to work with the software in our hands-on session at the end of the day.

  • Steam and Gas Turbine
    Course, Baarerstrasse 2 – 6300 , Zug, Switzerland, April 18, 2016

    Steam and Gas Turbine Design: 5-Day Training Course - April 18 - 22

  • Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
    Workshop, Princeton Marriott at Forrestal, Princeton, United States, April 15, 2016

    Join us for this engineering workshop where we will present the value of bringing CFD into your engineering process and show the key capabilities of STAR-CCM+ for fluid flow and heat transfer problems. We'll also give you the opportunity to work with the software in our hands-on session at the end of the day.

  • 17th Annual Internal Combustion Engine (ICE) Workshop
    Workshop, The Inn at St. John's, Plymouth, United States, April 15, 2016

    CD-adapco is pleased to announce the 17th annual Internal Combustion Engine workshop being held on April 15 at the Inn at St. John's in Plymouth, Michigan. This workshop is a great opportunity to come together with colleagues in industry, academia, and your partners at CD-adapco to discuss the latest in the field of in-cylinder engine simulation.

  • Time Changes All Things…Even Air Flow & Temperature
    Online Event, April 14, 2016

    This webinar will examine the meaning of time scales in physical systems and the implications to electronics cooling simulations. Both flow and thermal time scales will be demonstrated through sample simulations along with foundational calculations that help us understand and predict transient situations.

  • Application-Oriented CFD for the Turbomachinery Industry
    Workshop, Palm Beach Gardens Marriott, West Palm Beach Gardens, United States, April 14, 2016

    Please join us for a free, one-day workshop on "Application-Oriented CFD for the Turbomachinery Industry" taking place in Palm Beach Gardens, Florida. This event will provide an excellent opportunity for you to see firsthand how flow and thermal simulation can facilitate innovation and reduce development time and costs.

  • Free Webinar - Rotor Dynamics Training Preview
    Online Event, April 14, 2016

    The session will include: Short presentation of the contents of the full course (classroom/online) Detailed lecture of some specific aspects that are discussed in the full class.

  • AxSTREAM Training Workshop
    Course, 15 New England Executive Park, Burlington, United States, April 13, 2016

    3-Day Training Workshop for Professional Designers

  • Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
    Workshop, Toronto Airport Marriott Hotel, Toronto, Canada, April 13, 2016

    Join us for this engineering workshop where we will present the value of bringing CFD into your engineering process and show the key capabilities of STAR-CCM+ for fluid flow and heat transfer problems. We'll also give you the opportunity to work with the software in our hands-on session at the end of the day.

  • Gompute User Meeting 2016
    Conference, Gothenburg, Sweden, April 12, 2016

    The Nordic Meeting for Technical & Scientific Computing

  • Using Engineering Software to Teach Heat Transfer
    Online Event, April 12, 2016

    In this webinar, Professor Milovan Peric, co-author of Computational Methods for Fluid Dynamics, will demonstrate how engineering software can be integrated with traditional curriculum to improve the understanding of conduction, radiation, convection and CHT. Real-world course material includes heat transfer examples for both solid and fluid flows.

  • Axial and Centrifugal Pumps
    Course, 15 New England Executive Park, Burlington, United States, April 11, 2016

    Axial & Centrifugal Pumps Fundamentals, Design & Optimization – 5 Day Training

  • 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
    Conference, Honolulu, United States, April 10, 2016

    Over thirty forums dealing with all aspect of design, analysis and simulation of rotating machinery. Forum 31 on Algorithm for High performance CFD will focus on new developments in CFD algorithms, models and numerics in the field of turbo machinery simulation. Papers addressing any these aspects are welcome. The list of suggested topics include CFD solvers and methods, Pressure and density-velocity coupling algorithms, Immersed boundary method, etc ...

  • The Engineering Simulation Show
    Conference, The Roundhouse,, Derby, United Kingdom, April 7, 2016

    Showcasing the latest technologies in CFD, FEA and Engineering Simulation and Modelling

  • Free CFD Webinars using CONSELF Cloud CFD
    Online Event, April 7, 2016

    Series of 5 free Webinars in the following fields: HVAC, Valves, Pumps, Wind Tunnel and Buildings. We will show how easy is to complete a simulation with CONSELF Cloud CFD, directly in your browser on our Computing Cloud.

  • An Introduction to Open Source CFD Using OpenFOAM
    Course, University of Strathclyde, Glasgow, United Kingdom, April 6, 2016

    We present a 1-day training course as an introduction to the OpenFOAM CFD software using a hands-on, applications- based approach. Fee £200.

  • STAR Career Day
    Seminar, Silver Cloud Hotel Eastgate, Bellevue, United States, April 5, 2016

    By attending this student career event, you will gain insight in the hiring process of industry leaders in Aerospace, Ground Transportation, Enterprise Software, and National Laboratories. Get a competitive advantage by hearing a “Day in the Life” perspective from speakers about engineering roles in their company. This event is free but space is limited. Register today!

  • Discover Better Designs, Faster with an End-to-End Solution for Electric Machine Design
    Online Event, April 5, 2016

    This online event will demonstrate how our tools can be efficiently used together as an end-to-end solution for the design of modern electric machines. Presenters will discuss the workflow for thermal and mechanical stress management and the intelligent design of electric machines. The event will also feature a live demonstration of the thermal and electromagnetic workflow.

  • NUMAP-FOAM Spring School 2016
    Course, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, April 4, 2016

    Advanced School for Researchers using OpenFOAM

  • CONVERGE: Introductory and Advanced Topics
    Course, Austria, April 4, 2016

    Join ​us ​in ​Linz ​at ​Convergent ​Science ​GmbH ​for ​a ​ five ​day ​course ​that ​ will ​cover ​a ​variety ​of ​topics ​about ​CONVERGE ​v2.3. ​Space ​is ​limited ​ and ​registration ​closes ​on ​March ​31, ​2016.

  • Simulation Methods Used for the In-flight Icing Certification of Aircraft, Rotorcraft and Jet Engines
    Course, 3407 Rue Peel H3A 1W7, Montreal, Canada, April 4, 2016

    The course covers the fundamentals of icing, the certification process, and the role of CFD as an increasingly acceptable means of compliance. In the afternoon sessions, demonstrations are made using FENSAP-ICE, and the course has proven to be an important source of sales of the product, and a great forum for potential users to interact and exchange points of view.

  • CFD analysis using Open FOAM
    Online Event, April 4, 2016

    Industry level course on OpenFOAM covering validation problems on CFD analysis related to Turbomachines, Aerodynamics, Heat transfer ,Gas dynamics.

  • Axial and Centrifugal Pumps - Online Training Course
    Online Event, April 4, 2016

    6 Day online training courses on Axial and Centrifugal Pumps

  • CFD analysis using OpenFOAM
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 2, 2016

    Training on OpenFOAM CFD software with real time problems on CFD analysis. Projects covering TurboMachine , Aerodynamics and Gas Dynamics.Classes on Saturday and Sunday . Timings Saturday 3 to 6 PM , Sunday 10 AM to 1 PM. (Tentative).Total duration four weekends.Course Fee is Rs.30000 (Thirty thousand rupees)

  • One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st April 2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 4 hours per day.

March, 2016
  • A One Day Training Course - " Mixing In Stirred Tanks" - 31 March 2016, NJ
    Course, Rutgers University Inn and Conference Center, New Brunswick, United States, March 31, 2016

    The course will review principles of mixing in stirred tanks, provide recommendations for process design and scale- up, plus enable participants to apply these principles and recommendations to their mixing processes/problems.

  • Webinar: Rapid design of Small Modular Nuclear Reactors (SMR)
    Online Event, March 29, 2016

    Join us on 29th March for an introduction to new developments in systems simulation engineering. These developments offer greatly reduced times for performing typical design tasks required for Small Modular Nuclear Reactor (SMR) projects.

  • Fluid Dynamics Workshop
    Workshop, Provinciehuis Vlaams-Brabant, Leuven, Belgium, March 24, 2016

    Fluid flow is involved in many engineering applications. Discover the power of COMSOL Multiphysics for fluid dynamics analysis and any multiphysics application involving fluid flow in this workshop. Come and experience the power and efficiency of COMSOL Multiphysics! Date: March 24, 2016 Time: 13:00 - 16:00 Location: Leuven For registration, please visit COMSOL website. www.comsol.nl/events/id/61651

  • Flow and Solids Simulation for Oil Sands
    Workshop, Calgary Marriott Downtown Hotel, Calgary, Canada, March 22, 2016

    CD-adapco invites you to a one-day workshop that will provide you the opportunity to learn how engineering simulation and design space exploration technology benefits many aspects of oil and gas exploration, production and processing. The oil sands industry will be the specific focus of this event.

  • Aerospace Fuel System Modeling - Part 2 : Controls
    Online Event, March 17, 2016

    The second in our series on fuel system modeling showing the development and basic use of a 1D system model of a passenger aircraft fuel system through the addition of controls.

  • Attend NAFEMS CFD Seminar in Torino for FREE!
    Seminar, NH Ambasciatori Hotel, Torino, Italy, March 16, 2016

    NAFEMS Computational Fluid Dynamics in Engineering Simulation Seminar will be held on 16th March in Torino, Italy and registration is free of charge to both members and non-members of NAFEMS. The seminar will help CFD engineers and managers answer questions on: • How to improve simulation within the engineering processes • Best practice in engineering simulation processes. Please find further details and registration at http://nafems.org/events/nafems/2016/italia_cfd/.

  • ESI's Visual-CFD: A Smarter Way of Working with OpenFOAM
    Online Event, March 14, 2016

    A Smarter Way of Working with OpenFOAM

  • Week end batch (Sunday only)-Advanced course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 13-March-2016 ,Sunday 9 AM
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 13, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares. Class timings: Sunday (9:00 AM to 3 PM), 12 weeks

  • ECS - Thermal Management Challenges in Forced Convection Tablets
    Online Event, March 3, 2016

    Thermal design of forced convection tablets with FloTHERM XT and T3Ster presented by Electronic Cooling Solutions.

  • Using CFD to Increase Yields in Fermentation Production Methods
    Online Event, March 3, 2016

    In this webinar, we will present several case studies, a demonstration on G-L CFD simulation for mixing, effective use of mesh type and bubble size distribution.

  • One Month Evening batch-Course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st March 2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 4 hours per day.

  • One month course-Advanced course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 01-March-2016 ,Tuesday ,Evening batch
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares. Class timings: Evening(5:00 PM to 7 PM)

February, 2016
  • OpenFOAM Symposium at IIT Bombay
    LCH, IIT Bombay, Mumbai, India, February 27, 2016

    First OpenFOAM Symposium at IIT Bombay.The symposium aims to provide a platform for OpenFOAM experts and beginner to discuss and explore the capabilities of the software. Aimed at establishing a OpenFOAM user community in India.

  • Master the Fastest Route from CAD to CFD
    Workshop, Courtyard Kansas City Shawnee, Shawnee, United States, February 25, 2016

    In this workshop, we will cover the latest surface wrapping and meshing technologies that eliminate manual repair from the CFD process. This assures a faster route from CAD to flow simulation, and gives engineers the opportunity to concentrate on engineering analysis.

  • Predicting the Real-World Performance of Your Products with Multiphase Simulation
    Online Event, February 25, 2016

    This webinar will provide attendees with an introduction to multiphase modeling, the background and applicability of each method, as well as some practical examples that illustrate what can be achieved.

  • Aerospace Fuel System Modeling with Flowmaster - Part 1
    Online Event, February 25, 2016

    The first in a 3-part series showing the development and basic use of a 1D system model of a passenger aircraft fuel system.

  • CONVERGE: Applying High Performance Computing to Engine Design using Supercomputers
    Online Event, February 25, 2016

    Dr. Kodavasal will discuss work done at Argonne to develop both capability and capacity computing for CONVERGE engine simulations on supercomputing platforms.

  • Webinar: How Simulation can improve Wind Microclimate Studies for Pedestrian Safety & Comfort
    Online Event, February 25, 2016

    Planning applications for large buildings in the urban environment often require wind microclimate assessment. Join our webinar on 25th February to learn more about simulation-based assessment and how we can save you time and money in preparing your planning application.

  • Simulation to Solve Changing Technology Demands of the Refining & Petrochemical Industries
    Workshop, Houston Marriott Energy Corridor, Houston, United States, February 25, 2016

    The refining and petrochemical industries are undergoing tremendous change. All of this change results in the demand for cutting-edge technology that can meet the needs and reduce cost of production at the same time. These issues will be discuss in this workshop - focusing on the common challenges faced by the refining and petrochemical industries.

  • Simulation for Marine Applications
    Workshop, CD-adapco, Orlando, United States, February 25, 2016

    Do you want to learn how Computational Fluid Dynamics (CFD) can help improve your design process and achieve better results? Would you like to understand how you can reduce the need for towing tank testing by using CFD, or explore new, advanced methods for using CFD to design marine systems? If so, this is a workshop you shouldn't miss.

  • Webinar: Improving Gas Turbine Combustor Performance through Full-Fidelity CFD Simulations
    Online Event, February 25, 2016

    In this webinar, combustion specialists and developers will show how simulation software can be used to discover better GT Combustor designs faster.

  • Efficient Urea/SCR Aftertreatment Design using CONVERGE and GT-SUITE
    Online Event, February 24, 2016

    Successful Urea/SCR system design requires capturing the composition and mixing upstream of the catalyst as well as the NOx reduction reactions that occur within the catalyst. CFD is the dominant tool for simulating the urea-water spray, filming, mixing and urea conversion upstream of the SCR catalyst.

  • Master the Fastest Route from CAD to CFD
    Workshop, Indianapolis Marriott East, Indianapolis, United States, February 23, 2016

    In this workshop, we will cover the latest surface wrapping and meshing technologies that eliminate manual repair from the CFD process. This assures a faster route from CAD to flow simulation, and gives engineers the opportunity to concentrate on engineering analysis.

  • CFD in the Marine & Offshore Design Process
    Workshop, The Ritz-Carlton, New Orleans, New Orleans, United States, February 23, 2016

    Are you involved in the design or operation of offshore vessels or platforms? Or perhaps you would like to understand how you can reduce the need for towing tank testing by using CFD, or explore new, advanced methods for using CFD to design energy efficient vessels? If so, we are holding an educational seminar you shouldn't miss.

  • CFD in MATLAB - QuickerSim CFD Toolbox Workshop
    Workshop, Warsaw, Poland, February 22, 2016

    The workshop will be focused on efficient solving of CFD problems (including nonlinear material models, heat transfer, applications to teaching etc.) using a free of charge QuickerSim CFD Toolbox for MATLAB.

  • Combustion modelling in CFD (Gas Turbine domain)
    Course, India, February 20, 2016

    Online course on Combustion modelling in CFD. Classes on Saturday and Sunday from 8 AM to 10 AM (IST) via skype/desktop sharing.About 40 hours duration. Syllabus available at http://www.nicecfd.com/syllabus.php?c_id=6

  • Good (and bad) Vibrations: Designing for Flow Induced Vibration with Simulation
    Online Event, February 16, 2016

    This educational webinar will feature presentations from Oil & Gas engineering and management consultants Norton Straw and CD-adapco’s Oil & Gas technical specialist Alex Graham. They will outline a typical FIV study: starting with the EI guidelines, followed by CFD and FEA simulations.

  • Webinar: Rapid Analysis and Design of Cooling Flow Paths for Turbine Machinery
    Online Event, February 15, 2016

    Join this webinar on 15th February to learn about new developments in systems simulation engineering within the field of turbine machinery offering rapid design of cooling flow paths.

  • Discover Better Designs, Faster
    Workshop, Courtyard Columbus Airport, Columbus, United States, February 11, 2016

    This event will show you how to achieve the fundamental step into design exploration, i.e. directly linking CAD with CAE simulation. Demonstrations will highlight a complete workflow from automated meshing to our unique optimization algorithms which enable CAE engineers to perform multiple simulations seamlessly for robust design exploration and critical optimization studies.

  • The What, Why and How of Simulating Joule Heating
    Online Event, February 11, 2016

    This web seminar will explore the physical phenomena of Joule heating and present standard calculations that can be used to predict the amount of heat dissipated based on the electrical situation and conductor material. In addition, options for modeling Joule heating in engineering simulation will be shown through examples, including a discussion of the different advantages and disadvantages.

  • Topical Problems of Fluid Mechanics 2015
    Conference, Dolejskova 5, Prague, Czech Republic, February 10, 2016

    The aim of the conference is to discuss contemporary problems of fluid mechanics and to bring out latest results. Scope of the conference covers the whole field of fluid mechanics. Papers on experimental, numerical and theoretical investigations of problems in fluid mechanics are welcome. Also reports on new mathematical and/or experimental approaches to solution of fluid flow problems are of great interest.

  • 9TH INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS
    User Conference, SİDE HOTEL, ISTANBUL, Turkey, February 8, 2016

    ICCFD, a biennial event, is the merger of two important CFD conferences: the International Conference on Numerical Methods in Fluid Dynamics, ICNMFD (since 1969) and International Symposium on Computational Fluid Dynamics, ISCFD (since 1985). The first ICCFD conference was held in 2000 in Kyoto, the seventh in 2012 in Hawaii, the eighth in 2014 in Chengdu, and the ninth conference, ICCFD9, will be held in Istanbul, Turkey in July 11-15, 2016.

  • A Better Understanding of Particulate Flows and Fluid Flows
    Online Event, February 4, 2016

    Coupling Computational Fluid Dynamics (CFD) with Discrete Element Modeling (DEM) is a powerful combination to investigate the effects of particulate flows and fluid flows. This webinar will highlight how these technologies have been applied to shorten product process development cycles and reduce energy requirements.

  • Discover Better Designs, Faster
    Workshop, Hartford Marriott Farmington, Farmington, United States, February 3, 2016

    This event will show you how to achieve the fundamental step into design exploration, i.e. directly linking CAD with CAE simulation. Demonstrations will highlight a complete workflow from automated meshing to our unique optimization algorithms which enable CAE engineers to perform multiple simulations seamlessly for robust design exploration and critical optimization studies.

  • Master the Fastest Route from CAD to CFD
    Workshop, Courtyard Pittsburgh Arpt Settlers Ridge, Pittsburgh, United States, February 2, 2016

    In this workshop, we will cover the latest surface wrapping and meshing technologies that eliminate manual repair from the CFD process. This assures a faster route from CAD to flow simulation, and gives engineers the opportunity to concentrate on engineering analysis.

  • Discover Better Designs, Faster
    Workshop, Courtyard Philadelphia Willow Grove, Willow Grove, United States, February 2, 2016

    This event will show you how to achieve the fundamental step into design exploration, i.e. directly linking CAD with CAE simulation. Demonstrations will highlight a complete workflow from automated meshing to our unique optimization algorithms which enable CAE engineers to perform multiple simulations seamlessly for robust design exploration and critical optimization studies.

  • One Month Evening batch-Course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st February 2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 4 hours per day.

  • Free CFD Toolbox for MATLAB - Online Course
    Online Event, February 1, 2016

    Online course on CFD simulations in QuickerSim CFD Toolbox for MATLAB.

January, 2016
  • Subsea: Improving Safety and Mitigating Risk through Simulation
    Workshop, Houston Marriott Energy Corridor, Houston, United States, January 28, 2016

    The day's events will include guest presentations discussing the use of simulation in real-world engineering projects. Topics covered will include Erosion, Thermal analysis, Flow-Induced and Vortex- Induced Vibration, and Separators. We will have a demo and hands-on session with STAR-CCM+®, CD-adapco's flagship simulation tool.

  • GET FIRED UP! Combustion Simulation in the Process Industry
    Online Event, January 28, 2016

    In this webinar, you will learn the various ways to use CFD simulation to improve and optimize combustion system designs via validation and case studies. A technical specialist will use state-of-the-art simulation software to demonstrate the ease of use and set-up of optimization/design space exploration of a combustion simulation.

  • Webinar: Rapid gas turbine combustion chamber analysis and design using a system modelling approach
    Online Event, January 26, 2016

    Flownex invites you to an exciting introduction to new developments in systems simulation engineering with in the field of turbine combustion chamber analysis and design. We invite you to a webinar where we will discuss the full cost, risk and time saving advantages as well as the incredible accuracy of the simulations.

  • How CFD Improves Propeller Performance for Efficient Ship Propulsion
    Online Event, January 21, 2016

    During this webinar, Wärtsilä Propulsion will show that with the aid of CFD simulations of the propeller in behind ship condition, a direct feedback loop has been established to the propeller designers. In addition, Lloyd’s Register will demonstrate how they use relatively fast numerical methods for calculating the performance of a propeller in the wake flow of a ship.

  • Exploring Effective Urea/SCR Aftertreatment CFD Simulations
    Online Event, January 20, 2016

    Are you getting the accuracy and speed you need from your engine aftertreatment simulations? Join us for a webinar to find out how to eliminate user meshing and take advantage of a comprehensive CFD tool for urea/SCR design.

  • CFD in MATLAB - 2-Day course on QuickerSim CFD Toolbox
    Course, Warsaw, Poland, January 20, 2016

    The course will be focused on efficient solving of CFD problems (including nonlinear material models, heat transfer, applications to teaching etc.) using a free of charge QuickerSim CFD Toolbox for MATLAB. Tips & Tricks and many examples will be given.

  • Simulating Flow Induced Noise and Vibration for Accurate Modeling
    Online Event, January 19, 2016

    Presenters will cover how recent advances in hardware performance, combined with newly developed methods in simulation software and Vibro-Acoustic and Aero-Vibro- Acoustic technology like wave6®, present new opportunities. Attendees will learn how they can more accurately model flow induced noise and vibration across a broad frequency range.

  • First of their kind Gas Turbine Workshops in India - CFD Workshops
    Workshop, CMR Institute of Technology No.132, AECS Layout, Kundalahalli,, Bengaluru, India, January 18, 2016

    It consists of 3 workshops on CFD for Gas Turbines by Dr. Bijay K. Sultanian, an international CFD expert & trainer.

  • Robust System Design with Simulation
    Online Event, January 14, 2016

    This seminar will explore the capabilities of simulation software to identify families of feasible designs, understand design sensitivities, and predict system robustness. A specific electronics cooling example will be optimized and tested for sensitivity and robustness under varying manufacturing and usage scenarios to produce a better design faster than ever before.

  • Flowing Matter 2016
    Conference, Faculty of Engineering of the University of Porto, Porto, Portugal, January 11, 2016

    This conference will serve as an important event to get the three scientific communities involved in the COST Action MP1305 closer to each other: complex fluids (suspensions, granular materials, glasses, rheology), active matter (biological and synthetic micro-swimmers, bird flocks, insect swarms), and complex flows (turbulence, chaotic flows). Contributions that cover interdisciplinary aspects, i.e. that cross two or more areas are particularly encouraged.

December, 2015
  • Advanced training programme on CFD analysis (Saturday and Sunday 8 AM to 10 AM IST)
    Online Event, December 26, 2015

    Duration: 10 weeks ( 20 sessions) Training mode: 100 % live interactive sessions through skype, desktop sharing, very close to class room sessions. Certificate: Industry recognized certificate will be provided. Next batch: from 26-December-2015 Registration:Last date for registration ,18-December-2015 Registration and payment of fees:Online payment gateway in our website (Pay pal /Direc pay)

  • Conference on Computational PDE 2015
    Conference, TIFR Center for Applicable Mathematics, Bangalore, India, December 21, 2015

    The conference brings together researchers working on finite difference and finite volume methods for solving Partial Differential Equations to present their latest research work. We encourage you to submit contributed papers on novel and high order accurate schemes, and on the numerical analysis of such schemes. We also encourage participation from mathematics and engineering departments and hope that the conference will provide a platform for interdisciplinary discussions.

  • 2nd International Conference on Computational Methods in Engineering and Health Sciences
    Conference, Department of Aerospace Engineering, Universiti Putra Malaysia, Serdang, Malaysia, December 19, 2015

    Two day International Conference on Computational Methods in Engineering and Health Sciences (ICCMEH-2015) serves the purpose of bringing together the computational scientists and engineers and medical fraternity from various interdisciplinary domains under a common forum. The theme of this conference will be broad covering several analytical and numerical techniques, and novel applications of computational techniques to solve problems in engineering, health sciences disciplines

  • Self Financed One Week Training on Computational Fluid Dynamics (CFD) with OpenFOAM
    Course, Department of Mechanical Engineering, VNIT, Nagpur, India, December 14, 2015

    The goal of the present training is to objectively appreciate the open source CFD code OpenFOAM for use on various types of problem. This training gives the platform to the participant to understand OpenFOAM for basic to advanced to programming level.

  • Sunday batch-Course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 13-December- 2015
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 13, 2015

    Week end batch course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Class duration: Sunday 9 Am to 3 PM. Ten sundays,most suited for working professionals and out station students.

  • How to Dramatically Improve Your CFD Design and Analysis Time
    Online Event, December 10, 2015

    Are you under more pressure than ever to work faster and more efficiently? What if you could improve your data processing times by 10-30%? Take advantage of the increased speed and lower memory usage in Tecplot 360 EX by converting your existing data files to SZL (.szplt) format. A small investment of time up front can lead to big payoffs later on during design and analysis.

  • Thermal Modeling Approaches for Printed Circuit Boards (PCBs)
    Online Event, December 10, 2015

    This seminar will examine the main methodologies for modeling printed circuit boards in thermal simulations of electronic assemblies. The methods vary from fully- detailed models that resolve all the traces to a simplified geometric model with averaged properties. Each method will be described and demonstrated, and the advantages and disadvantages of each approach will be detailed.

  • Workshop for Multi-Disciplinary and Multi-Objective Design Optimisation
    Workshop, The Venture Centre, Sir William Lyons Rd, COVENTRY, United Kingdom, December 9, 2015

    Understand how worthwhile it is to implement design optimisation to overcome the increasing market challenges. modeFRONTIER is used in various engineering disciplines and for numerous applications, supporting designers and engineers, operating in all industrial sectors, to identify the best design solutions.

  • Webinar: Modeling Comprehensive Oil & Gas Industry Solutions Using Flownex SE
    Online Event, December 8, 2015

    Flownex® SE is a 1D thermal fluid analysis package that provides a complete solution for system and sub-system level design. Join this webinar on 8th December to see how Flownex® SE can help you to determine pressure drop (flow) and heat transfer (temperature) for the connected components of a complete system in steady state and transient, e.g. pumps or compressors, pipes, valves, tanks and heat exchangers.

  • 11th International Conference on CFD in the Minerals and Process Industries
    Conference, Melbourne Convention and Exhibition Centre (MCEC), Melbourne, Australia, December 7, 2015

    The conference will cover the application of CFD in process industries such as chemicals, food, bio, oil/gas, power generation, mineral processing & metal production. Topics of interest include: coal combustion, hydrocyclones, casting, fluidised beds, smelting, furnaces, slurries, steelmaking, crystallisation, stirred tanks, granular flow. Mini-symposia topics for this conference: - Gas-particle Flows - Micro-engineering & Bio-engineering - GPUs and Next Generation Computing

  • Discrete Element Modelling (DEM) to Aid the Development and Manufacture of Composite Particulates for the Pharmaceutical, Food
    Workshop, College Park Marriott Hotel & Conference Center, East Hyattsville, United States, December 7, 2015

    Please join us for this workshop as we explore the benefits of applying CFD and DEM in the pharmaceutical, food and chemical process industries.

Pages:

Prev    1    2    3    4    5    6    7    8    9    10    11    12    13    14    15    16    17    18    19    20    21    22    23    24    25    Next   

[Back to Events Calendar Front Page]