CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Passed Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Passed Event 1201 - 1300 of 1985, Sorted by Start Date:

October, 2006
September, 2006
  • PLM Road Map 2006
    Conference, The Dearborn Inn, Dearborn, United States, September 27, 2006

    Annual PLM Road Map conference focusing on thought leadership in design and engineering. Join leading-edge users, top vendor architects, and leading industry analysts as they discuss their experiences in addressing strategic PLM topics.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Salzburg, Austria, September 27, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Graz, Austria, September 26, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • 5th International Symposium on Turbulence, Heat and Mass Transfer
    Conference, Hotel Palace, Dubrovnik, Croatia, September 25, 2006

    The 5th THMT symposium will provide an opportunity to present recent advances and to discusss current problems, future needs and prospects in the area of heat and mass transfer associated with turbulence.

  • Introduction to FLUENT Training
    Course, Santa Clara, United States, September 25, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Wien, Austria, September 25, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • SONIC 06 - National Level Symposium on CFD
    Conference, Pune, India, September 22, 2006

    INTERNATIONAL INSTITUTE OF INFORMATION TECHNOLOGY in association with FLUENT INDIA (www.fluent.co.in), the worlds leading supplier of computational fluid dynamics (CFD) software and services presents SONIC 06, Symposium On Novel Ideas in CFD, a proposed National Level Symposium on Computational Fluid Dynamics.

  • Advanced Thermal Modeling Course by Fluent
    Course, Fluent Inc., Austin, United States, September 21, 2006

    This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.

  • Fluent Webinar "Rapid Flow Modeling: CFD-Power fuer den Design-Experten"
    Online Event, September 21, 2006

    !New Product! Online-Seminar will be in German language

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, September 20, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • Fluent-Workshop "Umwelttechnik"
    Workshop, Darmstadt, Germany, September 20, 2006

    Fluent laedt ein: Einsatzmoeglichkeiten und Nutzen von CFD in der Umwelttechnik.

  • Numerische Berechnung turbulenter Stroemungen in Forschung und Praxis
    Course, Universitaet Karlsruhe (TH), Karlsruhe, Germany, September 20, 2006

    Der Kurs stellt unterschiedliche Ansaetze und Methoden zur Berechnung turbulenter Stroemungen vor. Ausgehend von den physikalischen Eigenschaften solcher Stroemungen werden zahlreiche Varianten statistischer Modelle diskutiert (k- epsilon, k-omega, SST, RSM, EASM, ... ), sowie zeitlaufloesende Verfahren ( DNS, LES, DES, URANS, ... ). Implementierungsaspekte werden besprochen. Vor- und Nachteile der Modelle an zahlreichen Beispielen illustriert.

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Darmstadt, Germany, September 19, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • Live Demonstration of EFD Software - All Welcome
    Online Event, September 19, 2006

    This will be a 30-minute live online demonstration of the latest CAD-integrated EFD software from Flomerics

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, September 18, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, September 18, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Austin, United States, September 18, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Fluent Webinar "Kraftwerkstechnik"
    Online Event, September 18, 2006

    Online-Seminar will be in German language

  • Godunov Methods in Computational Engineering and Technology, by Prof. E.F. Toro OBE
    Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, September 18, 2006

    The course is about a broad class of advanced numerical methods for solving partial differential equations that model a variety of physical/chemical processes of interest to industry, academia and research organizations. The emphasis is on basic concepts and the foundations required for algorithm design, code development and practical applications.

  • CFD ACE+ and CFD FASTRAN Training
    Workshop, 100 Ft. Ring Road, 3rd Phase, 6th Block,BSK III stage, Bangalore-560085, India, September 18, 2006

    ESI INDIA is conducting a five-day training course on Multi- physics Modeling using CFD codes; CFD-ACE+ and CFD-FASTRAN.

  • Numerical Analysis of Flow Phenomena
    Conference, Hotel Belvedere Imperial, Hersonnisos, Crete, Greece, September 15, 2006

    International Conference of Numerical Analysis and Applied Mathematics 2006. During the conference the following session will be organized: Numerical analysis of flow phenomena

  • Fluent-Workshop "Rapid Flow Modeling fuer den Design-Experten"
    Workshop, Duesseldorf, Germany, September 14, 2006

    Fluent laedt ein: Erleben Sie die einfache Handhabung und die Funktionsfuelle unserer neuen Software FloWizard live.

  • TGrid 4.0 Advanced Training
    Course, Fluent Inc., Ann Arbor, United States, September 13, 2006

    Fluent is offering an advanced TGrid 4.0 course for general TGrid users who are interested in meshing complicated geometry. The program will have an automotive focus, however, it is open to all TGrid clients. Attendees must have completed TGrid introductory training and it is recommended that they have at least one year of experience using the software.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Chicago, United States, September 11, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, September 11, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • 2006 Fluent US Automotive CFD Summit
    User Conference, Hyatt Regency Dearborn, Dearborn, United States, September 11, 2006

    Attendees tell us year after year that the CFD Summit is the one event all year they rely upon to get the latest information about new technology developments in computational fluid dynamics and what lies ahead in the years to come. This year's program will be no exception

  • Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Gebaeudetechnik"
    Online Event, September 11, 2006

    Online-Seminar will be in German language

  • Fluent Webinar "EDV-gestuetzte Brandsimulation mit CFD"
    Online Event, September 11, 2006

    Online-Seminar will be in German language

  • Introduction to FLUENT Training
    Course, Seattle, United States, September 9, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • ECCOMAS CFD 2006
    Conference, Egmond aan Zee, Netherlands, September 5, 2006

    The next in the bi-annual series of conferences on CFD, organized by ECCOMAS (The European Community on Computational Methods in Applied Sciences and Engineering)

  • 3rd Symposium on Advanced Turbulence Modeling for Industrial CFD
    Conference, Hotel Hilton Belem, Belem, Brazil, September 3, 2006

    The purpose of this symposium is to bring together researchers in the field of Turbulence Modeling to evaluate recent progresses, anticipate future modeling requirements and preview future research directions. Emphasis will be given to applications and solution of Industrial Problems. Authors are invited to participate in this event to expand international cooperation, understanding and dissemination of recent advances in the general area of Turbulence Modeling.

August, 2006
  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, August 21, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, August 21, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Numerical Methods in Fluid Dynamics
    Conference, Greece, August 21, 2006

    Aim of Special Session is the discussion of Numerical Methods in Fluid Dynamics. We plan to discuss spectral, finite-difference, finite-volume and others methods in this area. Special numerical methods for flows with complex geometry and flows with hydrodynamic instabilities are especially welcome.

  • CFD OIL 2006
    Conference, Rio de Janeiro, Brazil, August 15, 2006

    2nd Latin American CFD Workshop for the Oil Industry

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, August 14, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • IHTC-13, 13th International Heat Transfer Conference
    Conference, Sydney, Australia, August 13, 2006

    Covers both fundamental and applied topics in heat transfer.

  • Advanced Thermal Modeling Course by Fluent
    Course, Santa Clara, United States, August 10, 2006

    This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, August 9, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • Training Program in Computational electromagnetism and calculation of RADAR cross section
    Workshop, Centre for Development of Advanced Computing Knowledge Park, Bangalore, India, August 8, 2006

    Zeus Numerix, Mumbai and CDAC, Pune are jointly organising a workshop on "Computational Electromagnetism and Calculation of Radar Cross Section". The prime focus of the workshop would be to train scientists and engineers in solving problems through several case studies. Fundamental of CEM will be covered by IIT Bombay Faculty, Application part will be covered by Zeus Numerix Faculty and High Performance Computing by CDAC Faculty.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, August 7, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, August 7, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • TGrid 4.0 Advanced Training
    Course, Fluent Inc., Ann Arbor, United States, August 7, 2006

    Fluent is offering an advanced TGrid 4.0 course for general TGrid users who are interested in meshing complicated geometry. The program will have an automotive focus, however, it is open to all TGrid clients. Attendees must have completed TGrid introductory training and it is recommended that they have at least one year of experience using the software.

  • Solving Dynamic Mesh Problems with FLUENT V6
    Course, Fluent Inc., Ann Arbor, United States, August 3, 2006

    This training course, offered in Fluent's Ann Arbor office, is designed for existing users of FLUENT.

  • Fluent's Fluid Mechanics and CFD Review Course
    Course, Fluent Inc., Lebanon, United States, August 2, 2006

    This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics.

  • Tcl/Tk/Glyph Class
    Seminar, 213 South Jennings Avenue, Fort Worth, United States, August 2, 2006

    The Tcl/Tk/Glyph Training Course is a new 3-day session that covers Tcl, the underlying programming basis of Gridgen Glyph, and Tk, Tcl's graphical toolkit for building GUI panels, within the framework of Gridgen Glyph, Gridgen's scripting language. Taught by a well-known Tcl/Tk programming expert and author, this course combines lectures with interactive examples and hands-on problems.

  • Diploma in Advanced CFD Analysis - DACFD
    Course, 3, Anjali Apartment, 768/12, Bhandarkar Road, Deccan, Pune, India, August 1, 2006

    CCTech has launched six months training course in CFD Analysis starting from August 2006. Course is structured to cater to industrial requirements.

July, 2006
  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, July 24, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Advanced Training in FLUENT
    Course, Fluent Inc., Lebanon, United States, July 17, 2006

    This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Austin, United States, July 17, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Gridgen Standard Training Course
    Seminar, Baltimore, United States, July 17, 2006

    The Gridgen Standard Training Course includes three days covering both basic and advanced Gridgen usage. The most commonly used GUI commands and efficient tools for making grids quickly are thoroughly explained. The training course progresses to more advanced tools and how to work with difficult topologies and geometry models. Tutorials will demonstrate the topics discussed and allow attendees their own practice time with the newly learned tools.

  • 4th Intl. Symposium on Computational Wind Engineering (CWE2006)
    Conference, PACIFIO YOKOHAMA, Yokohama, Japan, July 16, 2006

    This symposium seeks to facilitate the exchange of the latest scientific and technical information in the field of Computational Fluid Dynamics, particularly in its application to Wind Engineering.

  • CFD 2006 Queen's University at Kingston, Canada - July 16-18, 2006
    Conference, Queen's University, Kingston, Canada, July 16, 2006

    14th Annual CFDSC Conference will feature 4 keynote lecturers, a CFD Challenge exercise and a short-course, which will be held immediately following the conference.

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, July 12, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • Fourth International Conference on Computational Fluid Dynamics
    Conference, University of Ghent, Het Pand, Ghent, Belgium, July 10, 2006

    ICCFD is devoted to all innovative aspects of CFD, basic and applied.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, July 10, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, July 10, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to POLYFLOW Training by Fluent
    Course, Fluent Inc., Lebanon, United States, July 10, 2006

    This course is intended for people who have had little or no experience using POLYFLOW. New users of the software should register for the four-day training course.

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, July 10, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Turkey FLUENT User Group Meeting
    Conference, Bilkent Hotel, Ankara, Turkey, July 5, 2006

    This three day event is for gathering FLUENT users in Turkey. First day will be dedicated to trainings and the following two days there will be FLUENT user articles as well as Flowmaster and Concepts-NREC demonstrations at parallel sessions.

  • Advanced School on Computational Model for Turbulent Multiphase Reacting Flows
    Course, CISM - Palazzo del Torso - Piazza Garibaldi 18, Udine (UD), Italy, July 3, 2006

    The course is addressed to master and PhD students in engineering and science, postdocs and industrial researchers working on simulation and modeling of multiphase polydisperse systems, such as: bubble columns, fluidized beds, aerosol, spray combustion chambers, crystallization and precipitation etc.

  • 2nd STAR CD USERS MEET
    User Conference, Banglore, India, July 3, 2006

    CSM Software , bangalore - hosting 2nd STAR CD users meet at bangalore

June, 2006
  • Automated Design and Optimisation Techniques
    Seminar, IMechE, 1 Birdcage Walk, London, United Kingdom, June 28, 2006

    Improved computer processor speeds have enabled automated design and optimisation techniques to become more practical, making this topic essential in today's design environment. This seminar will examine some techniques being used with a wide range of practical examples. Industrial and academic speakers will make this a fascinating and educational event for anyone involved in CFD, design and computing science.

  • Preprocessing Enhancements Workshop for the Automotive Industry
    Workshop, St. John's Conference Center, Plymouth, United States, June 28, 2006

    In addition to improvements in existing tools like prism grows and surface intersection, TGrid 4.0 offers a new surface wrapper tool. Find out more about it at this free workshop.

  • Fluent Webinar "Auslegung und Optimierung von Bioreaktoren mit modernen Engineering-Werkzeugen"
    Online Event, June 27, 2006

    Online-Seminar will be in German language

  • 4th Joint CFX & FZR Short Course & Workshop on Multiphase Flows
    Workshop, FZ Rossendorf, Institute of Safety Research, Rossendorf (Dresden), Germany, June 26, 2006

    Workshop on Multiphase Flows: "Simulation, Experiment and Application"; Keynotes: Prof. Dr.-Ing. Peter Stephan, Prof. Dr. Y.A. Hassan, Prof. Dr. H.A. Jacobsen

  • Introduction to FLUENT Training
    Course, Columbia, United States, June 26, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • A First Course on CFD, by Prof. P.L. Roe
    Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, June 26, 2006

    The course will provide a solid foundation on traditional and advanced numerical discretisation techniques for the solution of the various partial differential equations which govern fluid flow, showing how successful numerical methods are rooted both in mathematical properties of those equations and in notions of computational efficiency.

  • 2nde Journee Numerique de la Marine
    Conference, DGA / Bassin d essais des carenes, Val de Reuil (27100), France, June 23, 2006

    FLUENT France et le Bassin d essais des carenes vous invitent le Vendredi 23 Juin 2006 a la seconde edition de la journee numerique de la marine. Hydrodynamique, Cavitation, Ventilation, Voiles sont autant de sujets d etude pour les industriels, architectes et chercheurs engages dans l industrie navale. Bien utilisee, la simulation numerique s affirme aujourd hui comme un outil d analyse et de comprehension de ces phenomenes.

  • Fluent Webinar "Rapid Flow Modeling: CFD-Power fuer den Design-Experten"
    Online Event, June 22, 2006

    !New Product! Online-Seminar will be in German language

  • Particle-laden flow: from geophysical to Kolmogorov scales
    Workshop, University of Twente, Enschede, Netherlands, June 21, 2006

    This Colloquium focuses on particle-laden flows with interest ranging from the detailed flow-physics involving many embedded particles, to large-scale turbulent dispersion in environmental and geophysical problems. The purpose of the Colloquium is to address the gap between simulation, modeling and experiments on the one hand and requirements posed by realistic geo-physical or environmental problems on the other hand.

  • 7th Intl Conference on Vibration Measurements by Laser Techniques
    Conference, Faculty of Engineering, Ancona, Italy, June 20, 2006

    The event aims at creating an active forum for experts in vibration and acoustics, manufacturers in the field of optical and non-invasive instrumentation and industrial users. EXHIBITION Leading manufacturers of laser vibrometer systems, holographic systems and modal and noise analysis systems will exhibit their latest products. SHORT COURSE A one-day tutorial course will be held the day before the event to provide fundamentals of these techniques.

  • Fluent Webinar "Kostenguenstige, virtuelle Auslegung von Extrusionswerkzeugen durch CFD"
    Online Event, June 20, 2006

    Online-Seminar will be in German language

  • Short Course on Vibration Measurements by Laser Techniques
    Course, Faculty of Engineering, Ancona, Italy, June 19, 2006

    The one-day tutorial course aims at providing the fundamentals of Laser Techniques for Vibration Measurements and to offer hands-on experience on the most advanced instrumentation. The program of the event will include theoretical lectures held by experts in the field in the morning and laboratory sessions in the afternoon.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, June 19, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Summer School in Industrial CFD
    Course, The University of Nottingham, Nottingham, United Kingdom, June 19, 2006

    This will be the second running of this popular event initially sponsored by EPSRC. The course aims to bridge the knowledge gap faced by new CFD users and to enable them to use CFD technology with more confidence. The course is open to masters and PhD students as well as industrialists. It focuses on the use of commercial codes and calls on the experience of academics, industrialists and code vendors who will form the lecturing body.

  • Introduction to Icepak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, June 19, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • Fluent Webinar "Kraftwerkstechnik"
    Online Event, June 19, 2006

    Online-Seminar will be in German language

  • FREE WEBINAR: How Customers are Succeeding with a Customized Version of FloWizard
    Online Event, June 13, 2006

    Fluent will be holding a web seminar on customization of FloWizard and FLUENT. In this session we will present several customer examples of process automation via the customization of the FloWizard interface and GAMBIT meshing. We will describe the benefits of how the customization of the interface, meshing, solution processes and postprocessing can impact an overall development process. We will also conduct a general overview of the methods utilized in the example customizations.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Ann Arbor, United States, June 12, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to FLUENT Training
    Course, Santa Clara, United States, June 12, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Wasserwirtschaft"
    Online Event, June 12, 2006

    Online-Seminar will be in German language

  • Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Umwelttechnik - Luft"
    Online Event, June 12, 2006

    Online-Seminar will be in German language

  • CFD for Automotive Applications
    Conference, ARAI, P.B. No. 832,, Pune 411004, India, June 12, 2006

    For the first time, we have invited ANSYS, CSM & FLUENT together to give best presentations of their CFD packages viz. CFX, StarCD and FLUENT. They will present overview, methodologies, capabilities and case studies. After listening to the CFD packages, the delegates will listen to special speakers from Industry & Academia. These speakers will present case studies for automotive applications viz. powertrain, aerodynamics, HVAC, thermal management, acoustics & paint technology.

  • Advanced CAD development - Course Announcement
    Course, 768/12, PYC, Bhadarkar Road, Near Deccan,, Pune, India, June 10, 2006

    Diploma in Advanced CAD Development - DACAD. CCTech has launched course on CAD Development six months training courses starting from August 2006. Course is structured to cater to industrial requirements. The course syllabus is formulated by considering industrial requirements and inputs from various working professionals and IIT faculty.

  • Advanced Modeling of Particulate and Pollutant Formation in Turbulent Combustion
    Course, Politecnico di Torino, Torino, Italy, June 10, 2006

    This course aims at introducing the most popular advanced computational tools for particulate and pollutant formation that can be effectively used to design low emission turbulent combustion processes. This course is addressed to master and PhD students in engineering and science, post-docs and industrial researchers working on simulation and modeling of single and multiphase combustion processes.

  • Fluent Advanced Training: TGrid 4.0
    Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, June 9, 2006

    This course is for general TGrid users who are interested in meshing complicated geometry. The program will have an automotive focus, however, it is open to all TGrid clients. Attendees must have completed TGrid introductory training and it is recommended that they have at least one year of experience using the software.

  • Introduction to Airpak Training by Fluent
    Course, Fluent Inc., Lebanon, United States, June 7, 2006

    The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.

  • CGNS Tutorial Session
    Hyatt Regency Hotel at Embarcadero, San Francisco, United States, June 7, 2006

    A short 2.5 hour tutorial session on the CFD General Notation System (CGNS) will be held during the summer American Institute of Aeronautics and Astronautics (AIAA) meeting in San Francisco.

  • Turbulence Workshop
    Workshop, Vestagatan 2B, Gothenburg, Sweden, June 7, 2006

    Turbulence modelling is a key element in Computational Fluid Dynamics (CFD). Despite this, a single mathematical model that covers all kind of turbulent flows has not yet been derived. Instead, an engineer must choose from a wide range of different turbulence models, each having its advantages and disadvantages. This is, however, not really surprising since the objective of turbulence modelling is to approximate an extremely complicated phenomenon.

  • Tour de France RAPID FLOW MODELING
    Seminar, Paris, Toulouse, Lyon, France, June 7, 2006

    Le Rapid Flow Modeling est un nouveau concept qui s adresse aux designers, concepteurs ou ingenieurs metier. Il leur permet de passer facilement et rapidement de la CAO a la modelisation des ecoulements et des transferts thermiques.

  • Introduction to FLUENT Training
    Course, Fluent Inc., Lebanon, United States, June 5, 2006

    This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course

  • Introduction to Icepak Training by Fluent
    Course, Santa Clara, United States, June 5, 2006

    New users of Icepak software should register for the three- day introductory training course.

  • CFD & VIV Symposium, OMAE 2006 Conference
    Conference, Hamburg, Germany, June 4, 2006

    Addresses the use of Computational Fluid Dynamics (CFD) analysis in offshore applications, e.g. flow around bluff bodies at high Reynolds numbers, guidelines for turbulence modeling; benchmarking and validation of analysis tools; green water effects on FPSOs; roll damping; field data for validation and calibration of CFD with design tools, etc. The symposium also includes non- CFD issues related to VIV analysis and design methods and experimental data on VIV.

  • Predict, Analyse and Minimize Flow-Induced Noise from CFD
    Online Event, June 1, 2006

    Learn how the aero-acoustics simulation tools from LMS help you evaluate the noise from unsteady flow phenomena like vortex shedding and turbulent boundary layers, by coupling Computational Fluid Dynamics (CFD) methods with Computational Acoustics.

  • COMPUTATIONAL ELECTRO MAGNETISM(CEM) & CALCULATION OF RADAR CROSS SECTION(RCS)
    Workshop, CDAC, Knowledge Park, Old Madras Road, Byappanahalli, Bangalore, India, June 1, 2006

    The workshop is aimed at training engineers and scientists in Aerospace Laboratories /Industries /Academic Institutes, who wish to include CEM as a routine analysis tool in their design and analysis cycles.The course will be of use to those who work in telecommunication and antenna designs.

Pages:

Prev    1    2    3    4    5    6    7    8    9    10    11    12    13    14    15    16    17    18    19    20    Next   

[Back to Events Calendar Front Page]