CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Passed Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Passed Event 1301 - 1400 of 2393, Sorted by Start Date:

August, 2009
July, 2009
  • ANSYS Ask the Expert Series
    Online Event, July 29, 2009

    Our panel of experts will be available online to answer your questions on various uses of ANSYS Software. The series will be held every Wednesday in the month of August and September covering a wide variety of topics. Go to http://www1.ansys.com/customer/webinars/#expert to register today.

  • HyperWorks Enabled Community- Webinar Series Summer 2009
    Online Event, July 27, 2009

    This complimentary webinar series is an opportunity to take a deeper look at the latest HyperWorks Enabled Partner Applications. Each 45-minute webinar will be dedicated to one application. To accommodate multiple time zones, there will be duplicate sessions hosted for each partner application. Register at www.hyperworkscommunity.com/webinar

  • International Conference and Advanced School "Turbulent Mixing and Beyond," TMB-2009
    Conference, International Center for Theoretical Physics, Trieste, Italy, July 27, 2009

    The goals of the International Conference "Turbulent Mixing and Beyond" are to expose the generic problem of Non-equilibrium Turbulent Processes to a wide scientific community, to promote the development of new ideas in tackling the fundamental aspects of the problem, to assist in application of novel approaches in a broad range of phenomena, where the turbulent processes occur, and to have a potential impact on technology (please, visit http://users.ictp.it/~tmb/main/about.html for more details).

  • Webinar Series, Part 2: Solutions for Electrical Machines Including Control
    Online Event, July 23, 2009

    Integrating high fidelity electromagnetic and electromechanical physics based models into a system level simulation, can assist the engineers in optimizing drive performance as well as controlling harmonics and mitigating conducted and radiated EMI/EMC. This webinar series will review the methodology employed to achieve this integration.

  • Webinar on Design and Multidisciplinary Optimization of Turbomachinery with AxSTREAM
    Online Event, July 23, 2009

    The event presents effective methods of multidisciplinary (stress and vibration, aerodynamics and heat transfer) optimization and analysis of turbomachinery flow path using AxSTREAM software.

  • Webinar Series, Part 2: Solutions for Electrical Machines Including Control
    Online Event, July 21, 2009

    Integrating high fidelity electromagnetic and electromechanical physics based models into a system level simulation, can assist the engineers in optimizing drive performance as well as controlling harmonics and mitigating conducted and radiated EMI/EMC. This webinar series will review the methodology employed to achieve this integration.

  • Webinar Series, Part 1: Solutions for Battery Modeling and IGBT Inverter Modeling
    Online Event, July 16, 2009

    Integrating high fidelity electromagnetic and electromechanical physics based models into a system level simulation, can assist the engineers in optimizing drive performance as well as controlling harmonics and mitigating conducted and radiated EMI/EMC. This webinar series will review the methodology employed to achieve this integration.

  • Simulation, Testing and Diagnostics for Combustion
    Seminar, Via Celoria 16, Milano, Italy, July 14, 2009

    Seminar by "Comitato Italiano per la Ricerca sulle Fiamme".

  • CFD-Industrial training
    Course, SEED Infotech Ltd,Karve Rd,Pune, Pune, India, July 11, 2009

    SEED Infotech would be launching CFD-Industrial training (only Sat-Sun)on 11th July 09.

  • 10th Clean Air Conference
    Conference, Instituto Superior Tecnico, Lisbon, Portugal, July 7, 2009

    The conference deals with interconnected themes covering the reduction of local and global environment degrading emissions and aims to a better integration of supply and demand. The conference is a platform to describe, compare and evaluate new and innovative technologies, which maximise energy conversion while minimizing undesirable emissions. Attention is also given to the improvement of existing energy systems which will still be used for a long time.

  • EASC - European Automotive Simulation Conference
    Conference, Hilton Munich Park Hotel, Munich, Germany, July 6, 2009

    The 2009 event will cover the full spectrum of simulation and account for the entire range of physics that are relevant in vehicle design; namely structural, fluids, thermal and electronic design automation. This, the 4th EASC, offers a unique opportunity to get a comprehensive update on the latest technologies in Engineering Simulation for the Automotive Industry.

June, 2009
  • ANSYS Webinar: Drop Testing Virtual Product Designs
    Online Event, June 30, 2009

    See how the benefits of fewer physical prototypes, shorter product development cycles and drastically reduced product warrantee costs can be realized with the new and surprisingly affordable ANSYS Explicit STR product.

  • NAFEMS Accredited Computational Fluid Dynamics Summer School
    Course, University of Nottingham, Nottingham, United Kingdom, June 23, 2009

    The objective of the course is to empower users with tools and techniques in CFD, which can be applied to a wide range of industrial applications. This course will provide understanding of the mathematical foundation and focus on a detailed overview of the physical models necessary for applications in Chemical, Civil, Environmental and Mechanical Engineering and many other fields of engineering.

  • STARGlobal Forum 2009: Simulation for Energy Engineering
    Conference, Sugar Land Marriott Town Square, 16090 City Walk, Sugarland (Houston), United States, June 23, 2009

    The 2009 Energy Forum will showcase the results and business benefits energy engineers are achieving using 3-D flow, thermal, and stress simulation. This event provides an excellent forum for participants to learn more about how simulation is facilitating innovation in the Energy industry for competitive advantage through improved design and development for risk avoidance and performance improvements.

  • AxSTREAM in Turbomachinery Education - From a Couple of Parameters to Complete 3D Flow Path Design in a Few Classes
    Online Event, June 18, 2009

    The webinar is aimed at providing the educational community with new effective tools and methods to teach the basics of turbomachinery design. The program covers such topics as influence of main design parameters on turbomachinery performance; operation of turbomachinery in design and off design modes; 3D approach to design vortex airfoil and others.

  • Materials Characterisation 2009
    Conference, New Forest, United Kingdom, June 17, 2009

    The conference objective is to bring together researchers who use computational methods, those who perform experiments, and of course those who do both, in all areas of materials characterisation, to discuss their recent results and ideas, in order to foster the multidisciplinary approach that has become necessary for the study of complex phenomena. Topics of interest for this Conference range from generic characterisation methods to damage assessment and application to particular materials.

  • NAFEMS World Congress 2009
    Conference, Creta Maris Conference Center, Limin- Hersonissos, Greece, June 16, 2009

    This, the 12th International Conference organized by NAFEMS, brings together a wide range of leading industrial experts and academic researchers, to provide a unique insight into current best practice and future state-of-the- art in FEA and CFD. With over 150 presentations from industry, consultancy, software vendors and acadamia from around the globe, the agenda provides the largest and most comprehensive independent global view of simulation available.

  • ANSYS Webinar: ANSYS 12.0 Meshing for Automotive Applications
    Online Event, June 16, 2009

    ANSYS Workbench 2.0 meshing tools allow greater automation, which are perfect for design optimization and upfront simulation.

  • Multiphase Flow 2009
    Conference, Wessex Institute of Technology, New Forest, United Kingdom, June 15, 2009

    The fifth International conference on Computational Methods and Experiments in Materials Characterisation aims to bring together modellers, computational scientists and experimentalists to share experiences, successes, new methodologies and in general to promote the advancement of the stidy of multiphase flows.

  • Fourteenth Internatioanl Conference on Computational Methods and Experimental Measurements - CMEM 2009
    Conference, Algarve, Portugal, June 10, 2009

    CMEM 2009 is the fourteenth International Conference in this well established series on Computational Methods and Experimental Measurements. These successful meetings provide a unique forum for the review of the latest work on the interaction between computational methods and experimental measurements.

  • Using Flowmaster V7 as your COTS solution for the simulation of your secondary air systems at ASME Turbo Expo 2009
    Seminar, Orlando World Center Marriott Resort & Convention Center, Orlando, United States, June 9, 2009

    Join Flowmaster at ASME Turbo Expo 2009, Orlando, FL, June 8th to 12th, the premier event for the Gas Turbine industry. Mike Croegaert, Gas Turbine Product Manager will be presenting: Using Flowmaster V7 as your COTS solution for the simulation of your secondary air systems, on the Expositing Stage, during the Expo Reception at 5pm, June 9th.

  • ANSYS 12.0 Seminar Series - Dearborn, MI
    Seminar, Hyatt Regency Dearborn, Dearborn, United States, June 9, 2009

    Learn about the new features of ANSYS 12.0 from ANSYS team members and industry experts through the ANSYS 12.0 Seminar Series. The series will demonstrate how our users are benefiting from Simulation Driven Product Development resulting in improved products and processes.

  • From Images to Computational Hemodynamics
    Simula Research Laboratory, Oslo, Norway, June 8, 2009

    Summer school on computational hemodynamics using VMTK and FEniCS

  • Interactive Training on Turbomachinery Flow Path Design with AxSTREAM
    Workshop, , Orlando, United States, June 5, 2009

    SoftInWay Inc. organizes a 3-day intensive course focused on design, analysis, optimization and retrofit of axial and radial turbomachinery flow path.

  • ANSYS 12.0 Seminar Series - Philadelphia, PA
    Seminar, Park Hyatt Philadelphia at the Bellevue, Philadelphia, United States, June 3, 2009

    Learn about the new features of ANSYS 12.0 from ANSYS team members and industry experts through the ANSYS 12.0 Seminar Series. The series will demonstrate how our users are benefiting from Simulation Driven Product Development resulting in improved products and processes.

  • ANSYS Webinar: Linear Dynamics
    Online Event, June 2, 2009

    Topics included in this webinar include rotordynamics computation, component mode synthesis, modal assurance criterion, spectrum analysis. Learn more about the new exciting SNODE solver that provides increased performance in the computation of large models, as well as recent advances in high performance computing.

  • ANSYS Webinar: ANSYS 12.0 HPC Performance and ROI
    Online Event, June 2, 2009

    For those seeking to optimize their use of computing resources and investment in simulation, this session will provide valuable guidelines on where and how to deploy HPC for simulation.

  • Hybrid RANS-LES Methods for Industrial CFD : Overview, Guidance and Examples
    Course, GE GLOBAL RESEARCH CENTRE, MUNICH, Germany, June 2, 2009

    The aim of the 2-day course is to provide 1) an overview of turbulence modelling, 2) a firm foundation in the theory and ideas underlying, RANS, LES and Hybrid RANS-LES techniques, 3) recommendation and guidance for the appropriate and effective application of Hybrid RANS- LES,and 4) examples from real-world engineering simulations, using the DES class of models.

  • Fourth OpenFOAM Workshop
    Workshop, Ecole Polytechnique de Montreal, Montreal, Canada, June 1, 2009

    Fourth OpenFOAM Workshop

May, 2009
  • ANSYS 12.0 Seminar Series - Houston, TX
    Seminar, Hyatt Regency Houston, Houston, United States, May 27, 2009

    Learn about the new features of ANSYS 12.0 from ANSYS team members and industry experts through the ANSYS 12.0 Seminar Series. The series will demonstrate how our users are benefiting from Simulation Driven Product Development resulting in improved products and processes.

  • Webinar: Thermal Solutions with HFSS and ANSYS Mechanical
    Online Event, May 26, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

  • Mulitphase Flows - FZD & ANSYS Short Course and Workshop
    Conference, Forschungszentrum Dresden-Rossendorf e.V., Dresden, Germany, May 26, 2009

    7th FZD & ANSYS Short Course & Workshop "Multiphase Flow - Simulation, Experiment and Applications".

  • Fluid Structure Interaction 2009
    Conference, Royal Mare Village, Greece, May 25, 2009

    Fluid Structure Interaction 2009 is the fifth conference in this successful series, which provides a forum for the presentation of new ideas and the latest work in the specialised field of fluid structure interaction. The conference aims to promote international exchange of information and knowledge of fluid structure interaction problems, giving experts from different application fields the opportunity to interact with one another and to provide valuable cross breeding of ideas and techniques.

  • ANSYS 12.0 Seminar Series - Santa Clara, CA
    Seminar, Hyatt Regency Santa Clara, Santa Clara, United States, May 20, 2009

    Learn about the new features of ANSYS 12.0 from ANSYS team members and industry experts through the ANSYS 12.0 Seminar Series. The series will demonstrate how our users are benefiting from Simulation Driven Product Development resulting in improved products and processes.

  • Webinar: ANSYS Workbench 2.0 for ANSYS FLUENT Users
    Online Event, May 19, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

  • Simulation for Turbomachinery Engineering
    Seminar, CINECA, Casalecchio di Reno - Bologna, Italy, May 19, 2009

    Presentations, Demonstrations, Customer Testimonials will be given about : Fluid-Dynamics, Mechanics, Fluid-Structure Interaction.

  • Webinar: ANSYS 12.0 Explicit Dynamics STR
    Online Event, May 19, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

  • 21st International Conference on Parallel Computational Fluid Dynamics (ParCFD)
    Conference, Moffett Field, United States, May 18, 2009

    ParCFD 2009 is the 21st in a series of international meetings dedicated to discussion of recent developments and applications of parallel computing in the field of CFD and related disciplines. Past paper topics include: parallel algorithms, developments in software tools and environments, unstructured adaptive mesh applications, industrial applications, and more.

  • 6th Int'l Conference on Numerical Analysis in Engineering (nae2009)
    Conference, Sheraton Senggigi Beach Resort, Mataram city, Lombok Island, Indonesia, May 15, 2009

    Numerical analysis utilizing the advantages of the development of computer hardware and software has had an immerse impact in many field of engineering in recent years as it offers fast solution in engineering problems. The 6th International Conference on Numerical Analysis in Engineering NAE 2009 gives a place and opportunities for researchers and engineers from academic, industries and other institutions to exchange their scientific and technological information.

  • Webinar on Design and Re-design of Flow-Path for High-Efficiency Steam and Gas Turbine
    Online Event, May 14, 2009

    SoftInWay offers free webinar: Design and Re-design of Flow-Path for High-Efficiency Steam and Gas Turbine on Thursday, May 14, at 10 a.m. and 4 p.m. EST. After the webinar attendees will be able to shorten the design time and costs while performing 1D/2D/3D design and analysis of turbomachinery flow paths.

  • NAFEMS Two Day Practical CFD Analysis Training Course
    Course, Holiday Inn Coventry South, Coventry, United Kingdom, May 13, 2009

    The course offers excellent guidance on how to judge which approximations are acceptable and appropriate for solving a wide range of practical problems. Of equal importance is the manner in which the results are interpreted. Advice is provided which allows the correct decisions to be taken, based on results which are known to be reliable. The course is completely code independent.

  • 2nd National Computational Fluid Dynamics (CFD) Applications in Chemical Engineering
    Conference, Narmak, Tehran, Iran, May 12, 2009

    The National Conference on Applications of CFD in Chemical Engineering is the premier forum for the presentation of new advances and research results in the fields of theoretical, experimental, and applied CFD in process industries, oil & gas engineering, mineral, polymer and food processing.

  • Webinar: ANSYS 12.0 Fluid Dynamics
    Online Event, May 12, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

  • Webinar: Parametric Analysis -- Introducing ANSYS DesignXplorer 12.0
    Online Event, May 12, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

  • 2009 FLOW-3D European Users Conference
    User Conference, Hotel Krone, Tubingen, Germany, May 12, 2009

    The 2009 FLOW-3D(R) European Users Conference will be held on May 12, 2009 at the Hotel Krone in Tubingen, Germany! As in recent years, we expect participants from all over Europe and interesting user presentations which will certainly stimulate an intense exchange of experiences.

  • International Short Course: Flow Transition and Turbulence - Physical Nature and High Order DNS Code
    Course, 487 PKH, 411 S. Nedderman, UTA Math, Arlington, TX, United States, May 11, 2009

    Part I Physical Nature -Turbulence Origin in Boundary-Layer Flows, Predominant Mechanisms and Applications (Yury S. Kachanov) Part II Direct Numerical Simulation for Flow Transition and High Order DNS Code (Chaoqun Liu)

  • SIMDI09 - Simulation and Data Intensive Fair
    Seminar, Chalmers Conference Center, Gothenburg, Sweden, May 6, 2009

    SIMDI09 will be the fourth edition of our annual Simulation and Data Intensive Fair. In the past years, SIMDI has become an international and recognized event, where industrial and academic professionals share their knowledge about the latest Simulation and Data Intensive technologies.

  • Webinar: ANSYS Workbench 2.0 Introduction
    Online Event, May 5, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

  • Webinar: ANSYS 12.0 Structural Mechanics
    Online Event, May 5, 2009

    Join us for this free one-hour webinar and see how our users are benefiting from the insight that computer simulation offers.

April, 2009
  • ANSYS Webinar: Getting Your Solar Energy Project Off to a Rapid Start
    Online Event, April 30, 2009

    Learn how ANSYS technology is applied in solar energy project execution - from material and process innovation to product design and performance analysis.

  • ANSYS Webinar: Wind Energy Projects - From Blade Design to Wind Farms
    Online Event, April 29, 2009

    Learn how ANSYS engineering simulation accelerates understanding of the hydrodynamic and structural design aspects of blades, rotor assemblies and support structures, along with wind effects and system-level design.

  • Virtual Tow Tank - Computational Simulation Training for Naval Architects & Marine Engineers
    Course, Rockville, United States, April 21, 2009

    The aim of this course is to teach the techniques needed to conduct accurate and efficient marine simulations using computational fluid dynamics. The course is structured as a combination of lectures, demonstrations and workshops (tutorials). Best practices for meshing and analysis of stationary and multi-degree-of-freedom (DOF) free-surface applications are emphasized and demonstrated.

  • Progress in Wall Rurbulence: Understanding and Modelling
    Workshop, Laboratoire de Mecanique de Lille, Villeneuve d'Ascq, France, April 21, 2009

    Final WORKSHOP of the FP6 European project "WALLTURB"

  • Webinar on Axial Compressor Performance Analysis to Optimize the Manufacturing and Repair Costs
    Online Event, April 16, 2009

    The webinar focused on design, analysis, repair, and overhaul of existing turbomachinery, resulting in cost and time reductions. SoftInWay will discuss the main difficulties engineers face and provide the preferable procedure for flow path analysis supported by illustrative examples.

  • Effective Use of CFD for In-flight Icing Certification
    Course, University of Nevada Las Vegas, Las Vegas, United States, April 13, 2009

    This course illustrates the state-of-the-art of CFD applications in icing simulations and links theory to applications.

  • M.Tech Program in CFD
    Course, P-14, Rajiv Gandhi Infotech park, Hinjewadi, Pune, India, April 10, 2009

    Following M.Tech Degree Programs are offered at the International Institute of Information Technology, Pune, India, in academic articulation with University of Petroleum & Energy Studies, Deharadun. # M.Tech (Computational Fluid Dynamics) # M.Tech (Gas Engineering ) # MBA (Oil & Gas Management)

  • Advances in Mixing and Combustion
    Seminar, GE GLOBAL RESEARCH CENTRE, MUNICH, Germany, April 8, 2009

    This event is a 1-day seminar for practitioners and technical managers in the field of mixing and combustion. It will describe advances and developments in this field which have recently been shown to be critical to performance and emission control. The day will introduce advance and practicable concepts, ranging from system architecture and measurement techniques to the latest ideas in numerical modelling.

  • ANSYS Webinar: Simulation for Renewable Energy Technologies
    Online Event, April 1, 2009

    This webinar will explain how and why simulation tools from ANSYS, Inc. are being applied to the hydropower, biomass, wind, and solar industries.

March, 2009
  • Accelerating Biomedical Product Development Using ANSYS Simulation Tools
    Online Event, March 31, 2009

    During this webinar you will learn how the advanced and comprehensive multiphysics offerings from ANSYS can help you meet your company’s product development goals.

  • Virtual Tow Tank - Computational Simulation Training for Naval Architects & Marine Engineers
    Course, San Diego, United States, March 31, 2009

    The aim of this course is to teach the techniques needed to conduct accurate and efficient marine simulations using computational fluid dynamics. The course is structured as a combination of lectures, demonstrations and workshops (tutorials). Best practices for meshing and analysis of stationary and multi-degree-of-freedom (DOF) free-surface applications are emphasized and demonstrated.

  • Virtual Geoscience Workbench (VGW) Modelling Workshop
    Workshop, Royal School of Mines, Imperial College London, London SW7 2AZ, London, United Kingdom, March 30, 2009

    We simulate particulate systems working closely with fluids applications. The workshop aims to show potential users the range of discontinuous systems that can now be modelled with VGW and how scientists and engineers with modest or more extensive computer modelling experience may find VGW of interest for their future research. VGW is an Open Source project that will be attractive to both users and developers. It has been launched on a server, managed through Sourceforge.net.

  • Webinar: Particle Transport in Unsteady, Separated Flow
    Online Event, March 26, 2009

    Dr. Gustaaf Jacobs will discuss the physics of particles in a separated flow in the Lagrangian frame and the computation of these flows with high-fidelity computational methods. Dr. Jacobs is an assistant professor at San Diego State University. His research focuses on the fluid mechanics of separated particle-laden flows and the development of high-fidelity computational algorithms. This event is sponsored by Tecplot, Inc., a provider of CFD visualization software.

  • Engine Compartment Thermal Modeling
    Course, 9401 General Dr. , Suite 131, Plymouth, United States, March 19, 2009

    Your instructor will guide you through the fundamental approach and best-practices in applying CFD for thermal simulations in engine compartment and underhood environments. This will help increase your knowledge in the simulation approach for full 3D vehicle thermal simulations.

  • Simulation for Meeting Deep Offshore Technology Challenges
    Online Event, March 19, 2009

    This free online webinar will demonstrate how accurate flow, thermal, and stress simulation can be used for Virtual testing and validation via 3-D physics. Presenters will discuss how this key business enabler is overcoming these challenges, by telling engineers what will work and why. Demonstrations will also show how techniques can be used to innovate existing designs and concepts to work at deeper levels.

  • Pointwise Meshing Seminar
    Seminar, Radisson SAS Scandinavia Hotel, Göteborg, Sweden, March 19, 2009

    CFD meshing seminar hosted by two engineers from Pointwise, Inc. held in Goteborg, Sweden on March 19, 2009. The seminar will include both Pointwise and Gridgen demonstrations as well as current and future product status. Lunch and coffee will be included.

  • Two-Day Short Course on CFD
    Course, MAXrad SOFTware India Pvt Ltd, Bangalore, India, March 13, 2009

    This training program is aimed at enhancing the knowledge of practicing automotive and aerospace engineers as well as to provide an advanced understanding of phenomena commonly encountered in Industrial flows and numerical techniques to handle them.

  • Diploma in Advanced CFD Analysis (DACFD) at CCTech, Pune
    Course, Flat No.6, Bharati Apartment, 26/1, Wakedewadi, Shivajinagar,, Pune, India, March 9, 2009

    Centre for Computational Technologies(CCTech) offers professional training in highly specialized area of CFD Analysis (DACFD).

  • NAFEMS Quality & Reliability in Aerospace CFD Seminar
    Seminar, East Midlands Conference Centre, Nottingham, United Kingdom, March 4, 2009

    For commercial aircraft, concerns over carbon emissions and the high cost of fuel help drive the quest for improved efficiency. Noise impact on densely populated areas provides another environmental concern. Minimizing drag is clearly important for efficient high speed cruise, but high lift is essential for safe low-speed takeoff and landing. CFD plays a major role in aircraft aerodynamics, where the requirements continue to push the capabilities of CFD technology.

  • Simulation for Marine Engineering
    Seminar, CILEA , Via R. Sanzio 4, Segrate - Milano, Italy, March 3, 2009

    Presentations about ANSYS tools: Workbench , Mechanical , FLUENT , CFX , AQWA. Presentations by ANSYS staff and by customers and users. A Modefrontier presentation will be given also.

February, 2009
  • Modeling Vehicle Aerodynamics and Vehicle Thermal Management (VTM)
    Online Event, February 26, 2009

    This free online webinar will highlight the ways in which numerical simulation can be used to improve vehicle aerodynamics and thermal management. Guest Speaker Robert Lietz, CFD Technical Expert at Ford Aerodynamics will discuss how the availability of simulation data early in the design process can guide descision-making and minimize engineering risk, by inspiring greater confidence in the product.

  • Free Webinar - Improving Axial Turbine Flow Path Efficiency between Overhauls: Strategy for 2010
    Online Event, February 17, 2009

    This webinar is dedicated to power station and airline engineers who want to improve efficiency of turbomachinery during overhauls.

  • 10th MpCCI User Forum
    User Conference, Schloss Birlinghoven, Sankt Augustin, Germany, February 17, 2009

    The MpCCI User Forum 2009 again will show latest developments and applications all around multi- disciplinary simulation coupling.

  • CFD-ACE+ Introductory Training
    Kruppstr. 82-100 ETEC V5-105 , Essen, Germany, February 10, 2009

    Learn about all of the basic features and operation of the entire CFD-ACE+ suite of tools.

  • Use of CFD Models in Fire Safety Engineering
    Seminar, Engineers Ireland, 22 Clyde Road, Dublin, Ireland, February 5, 2009

    This one day seminar organized by the Fire & Safety Division of Engineers Ireland (the Institution of Engineers of Ireland) will focus on the practical aspects and challenges of applying Computational Fluid Dynamics (CFD) models in fire safety engineering.

January, 2009
  • Short Term Training Program on Advanced Computational Techniques (ACT-2009)
    Workshop, National Institute of Technology, Warangal, India, January 27, 2009

    Overarching aspects of the different computational techniques and questions related to accuracy, efficiency, and cost effectiveness, which are most relevant for the engineering applications, the main spirit of this Short Term Training Program on Advanced Computational Techniques (ACT-2009) is to impart knowledge in a comprehensive way in the following areas. (i) Mathematical Modeling (ii) Discretization (iii) Solution algorithms

  • FEniCS'09
    Workshop, Simula Research Laboratory, Oslo, Norway, January 11, 2009

    The fourth annual FEniCS workshop

  • IBCAST
    Conference, CESAT, Islamabad, Pakistan, January 5, 2009

    Largest Scientific Event of Pakistan

  • Experimental Fluid Mechanics 20011
    Conference, Valdstein Chateau, Valdstejnovo namesti 1 , Jicin, Czech Republic, January 1, 2009

    The conference will focus on obtaining an overview of projects under investigation, and experimental methods used in the field of fluid mechanics and thermodynamics.

  • Workshop on Advanced Measurement Techniques and Computational Methods for Premixed and Partially Premixed Combustion
    Conference, Argentina, January 1, 2009

    NUMECA Int. and the Technical University of Darmstadt jointly organize an International Workshop on Advanced Measurement Techniques and Computational Methods for Premixed and Partially Premixed Combustion. The workshop is organized in the framework of the Marie Curie COMBINA project and is financially supported by the European Commission (FP7). The Workshop is organized in conjunction with the Seventh Mediterranean Combustion Symposium (MCS-7).

  • Smoothed Particle Hydrodynamics (SPH), 2-day course, February 2012, University of Manchester, UK
    Course, University of Manchester, George Begg Bldg, Manchester, United Kingdom, January 1, 2009

    This 2-day course on Smoothed Particle Hydrodynamics (SPH), 2-3 February 2012, is intended for engineering fluid mechanics including coastal and shallow water hydrodynamics, ballistics, nuclear flows, injection moulding, and other flows such as marine, structures, fluid/structure interaction, sloshing, flooding, debris, slurry, etc. SPH is a meshless computational method for potentially highly violent fluid flows where there is very large deformation with arbitrarily complex moving boundaries.

December, 2008
  • Open Source CFD International Conference 2008
    Conference, Hotel Concorde Berlin, Augsburger Strasse 41, Berlin, Germany, December 4, 2008

    You are cordially invited by ICON to the Open Source CFD International Conference 2008 which will be held in Berlin on 4th and 5th December. This year's Conference is addressing the increasing adoption of the CFD community towards the usage of open source-based technology. More specifically, as in last year's International Conference in London, it is focusing solely on OPENFOAM the leading Open Source CFD software.

  • LES4ICE - LES for Internal Combustion Engine Flows
    Workshop, IFP, Rueil-Malmaison (8km west of Paris), France, December 1, 2008

    2nd announcement and final programme available! The LES4ICE workshop aims at providing a forum for exchanges concerning recent advances in research on and the use of Large-Eddy Simulation (LES) applied to internal combustion engine flows, injection and combustion. The aim is to bring together engine designers and players in LES research worldwide and have them compare views on the state of the art in LES applied to ICEs and on the bottlenecks future research will have to overcome.

November, 2008
  • Front-loading CFD in the Design Process
    Seminar, The Ramada Hotel & Suites, Coventry, United Kingdom, November 26, 2008

    Terms like UpFront CFD, Engineering Fluid Dynamics and Simulation Driven Product Development have become associated with the areas of rapid growth in Computational Fluid Dynamics (CFD) implementation in recent years. All these phrases have behind them the concept that if you can use CFD tools early on in the engineering design process you stand to gain the most benefit because this is where the biggest changes in the design are practical.

  • Flow Simulation Using Particles - Bridging Computer Graphics and CFD
    Course, ETH, Clausiusstrasse 59, Zurich, Switzerland, November 14, 2008

    We present advances in flow simulations using particles with a focus on developing a bridge between the Computer Graphics (CG) and the Computational Fluid Dynamics(CFD) communities. The course describes particle methods in a comparative, case study driven framework, addressing for example visual realism of liquid simulations as related to the accuracy of enforcing incompressibility.

  • Advances in Mixing and Combustion: Architectures, Measurement Techniques and Numerical Modelling
    Seminar, Institute of Mathematical Sciences, London, South Kensington, United Kingdom, November 11, 2008

    The impact of climate change on the environment and the debate on available fossil fuel resources have created constraints for the combustion engineering community, and motivated the development of new methodologies and technologies. The seminar introduces new developments and ideas that can be deployed in an industrial R&D cycle, across a myriad of applications in the combustion engineering sector.

  • Engineering Simulation Energy Conference (ESEC)
    Conference, Omni Houston Westside, 13210 Katy Freeway, Houston, United States, November 11, 2008

    ANSYS, Inc. is pleased to host the 2008 Engineering Simulation Energy Conference (ESEC), an event focused on engineering challenges and innovation in the energy industry.

  • OpenFOAM Two Days Course
    Course, IBM Palisades Executive Business Conference Center, New York, United States, November 10, 2008

    Two full days OpenFOAM general introduction course.

  • Pointwise User Group Meeting
    User Conference, 600 Commerce Street, Fort Worth, United States, November 5, 2008

    Join us in Fort Worth, Texas on November 5-6, 2008 for two days of grid generation excitement. You will see special Pointwise and Gridgen training seminars, presentations by Pointwise staff on new product developments, exhibits by our partners, and user presentations. Not only will you learn about the latest Pointwise and Gridgen features, glimpse future developments, and network with other CFD experts, you will experience our own blend of Texas and Pointwise hospitality.

  • Pointwise User Group Meeting 2008
    User Conference, Embassy Suites Fort Worth - Downtown, Fort Worth, United States, November 5, 2008

    Join us in Fort Worth, Texas on November 5-6, 2008 for two days of grid generation excitement. You will see special Pointwise and Gridgen training seminars, presentations by Pointwise staff on new product developments, exhibits by our partners, and user presentations. Not only will you learn about the latest Pointwise and Gridgen features, glimpse future developments, and network with other CFD experts, you will experience our own blend of Texas and Pointwise hospitality.

October, 2008
  • FLOW-3D User Conferences to be held in Japan and Taiwan
    User Conference, Tokyo International Forum, Tokyo, Japan, October 31, 2008

    FLOW-3D Users Conferences will be held at the end of October 2008 in both Taiwan and Japan.

  • FLOW-3D User Conferences to be held in Japan and Taiwan
    User Conference, Cathay Financial Holdings Taipei, Taiwan, October 28, 2008

    FLOW-3D Users Conferences will be held at the end of October 2008 in both Taiwan and Japan.

  • Royal Society Discussion Meeting: Applied Large Eddy Simulation
    Conference, The Royal Society, 6-9 Carlton House Terrace, London, United Kingdom, October 27, 2008

    A 2-day, international-level scientific conference organised by Professor Paul Tucker and Dr Sylvain Lardeau, discussing the computational modelling of flows, vital for understanding & controlling processes relevant to aeronautical, environmental and numerous engineering problems.

  • 7th MIRA International Vehicle Aerdynamics Conference
    Conference, RICOH Arena, Coventry, United Kingdom, October 22, 2008

    Currently the three most important factors in aerodynamics development are: correlation, correlation & correlation. Bringing together all the stakeholders in the development community will ensure all sides of the discussion are robustly interrogated. Whether your focus is the fastest lap time or new levels of cabin refinement, the 7th MIRA International Vehicle Aerodynamics Conference is firmly established as the forum to discover the latest trends in all areas of aerodynamics.

  • ANSYS Conference & 26. CADFEM Users' Meeting
    User Conference, Darmstadtium, Darmstadt, Germany, October 22, 2008

    The German ANSYS Conference & the 26th CADFEM Users' Meeting from October 22nd - 24th , 2008 in the "City of Science" Darmstadt, reflects the broad variety, powerful performance, and flexibility of ANSYS in order to realize state-of-the-art Simulation Driven Product Development - covering different application areas such as Computational Fluid Dynamics (CFD), Structural Mechanics, Electronics, or Multiphysics.

  • Hybrid RANS-LES Simulations for Industrial Users
    Course, BAE Systems, Park Centre, Farnborough, United Kingdom, October 21, 2008

    A review of turbulence modelling techniques, covering RANS and LES.A firm foundation in the theory and ideas underlying Hybrid RANS-LES techniques, particularly DES. Industry perspectives on Hybrid RANS-LES techniques. Best practice guidance for the appropriate and effective application of DES for real-world engineering simulations. Future prospects for Hybrid RANS-LES techniques.

  • 9th Symposium on Overset Composite Grid and Solution Technology
    Conference, State College, United States, October 14, 2008

    This international symposium provides an open forum on Overset Composite Grid and Solution Technology for mathematicians, scientists, and engineers from academia, industry, and government. The technical organization is informal, and only oral presentations are required.

  • 2008 ESSS South American ANSYS Users Conference
    User Conference, Guanabara Palace Hotel, Rio de Janeiro, Brazil, October 14, 2008

    Find out how the most innovative companies from South America are able to increase productivity using ANSYS software.

  • OpenFOAM Two Days Course
    Course, Hotel 11, Gothenburg, Sweden, October 8, 2008

    Two full days OpenFOAM general introduction course.

September, 2008
  • 13th ERCOFTAC Workshop on Refined Turbulence Modelling
    Workshop, Graz University of Technology, Graz, Austria, September 25, 2008

    The workshop is dedicated to turbulence modelling. Two sessions will focus on test cases of scientific and engineering relevance : 1-Jet impinging onto a rotating, heated disc. 2- Flow in a 3-D diffuser. A third session is dedicated hybrid RANS/LES methods. Invited presentations : F. Menter (SAS method), M. Leschziner (Approximate, RANS-based wall boundary conditions for LES), S. Girimaji & B. Basara (PANS method), B. Chaouat (PITM method), C. Mockett (DES method)

Pages:

Prev    1    2    3    4    5    6    7    8    9    10    11    12    13    14    15    16    17    18    19    20    21    22    23    24    Next   

[Back to Events Calendar Front Page]