CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSA (http://www.cfd-online.com/Forums/ansa/)
-   -   ANSA geometric cleanup (http://www.cfd-online.com/Forums/ansa/89306-ansa-geometric-cleanup.html)

Mohankumarg12 June 9, 2011 07:39

ANSA geometric cleanup
 
Hi
I am using ANSA software for my geometric clean-up and I just done one tutorial to know the main commands.

But I am stuggling to find
how to do UNDO operation in this software?
How to refresh the geometry because, some times I am unable to see the surfaces which was actually there?

Many thanks,
Mohan.G

vangelis June 16, 2011 10:01

Hi Mohan,

Unfortunately there is no UNDO in ANSA, but you can undo most of the operations on your own.
For example if you Delete a Face you can Undelete it, if you make a Cut in a Face you can do Join with the right-mouse button and so on.

About the refresh of the display you can press
Ctrl+F9

hope this helps
Best regards
Vangelis

Mohankumarg12 June 16, 2011 10:11

Thank you
Vangelis

vangelis June 16, 2011 10:22

You are welcome,
let me know if you need anything else


All times are GMT -4. The time now is 20:51.