|July 15, 2011, 10:34||
Project Edges In New Ansa
Join Date: Jun 2011
Posts: 48Rep Power: 6
I'm trying to fix a bunch of FE elements in ANSA 13.1.3. I'm running across a problem where 2 faces are almost parrallel, slightly offset, and very close together which I believe will eventually lead to volume mesh issues. My solution would be to project one of the edges onto the other and chop off the excess. A coworker has told me that in ANSA 13.0 there is a function called Mesh>Shell Mesh>Util>Project Edges that he would use to fix the problem.
Does anyone know the equivalent to this function in ANSA 13.1 (or another function that might work...I understand it's hard to visualize what I'm dealing with)?
|July 18, 2011, 10:39||
Join Date: Mar 2009
Location: Thessaloniki, Greece
Posts: 197Rep Power: 10
If you are working on Geometry mesh (Faces)
then maybe you could use the function
Select one side and confirm and the opposite side and confirm. Then set a virtual translation vector and the distance (should set more than actual distance) and confirm. See section 8.23 of ANSA User Guide.
If you are working on FE-mod mesh (dead mesh without underlying geometry) then the function to use is
and then probable a
SHELL MESH>FILL GAP>FREE
Hope this helps
|Thread||Thread Starter||Forum||Replies||Last Post|
|SnappyHexMesh for internal Flow||vishwa||OpenFOAM Native Meshers: snappyHexMesh and Others||23||August 6, 2014 03:50|
|snappyHexMesh won't work - zeros everywhere!||sc298||OpenFOAM Native Meshers: snappyHexMesh and Others||2||March 27, 2011 21:11|
|snappyHexMesh aborting||Tobi||OpenFOAM Native Meshers: snappyHexMesh and Others||0||November 10, 2010 04:23|
|external flow with snappyHexMesh||chelvistero||OpenFOAM||11||January 15, 2010 20:43|
|CFD project idea||John Cleveland||Main CFD Forum||4||March 8, 2005 13:55|