CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] Help needed. Add Frozen doesn't work?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 18, 2012, 07:53
Default Help needed. Add Frozen doesn't work?
  #1
New Member
 
Muhammad K
Join Date: Apr 2012
Location: Sydney, Australia
Posts: 10
Rep Power: 13
MuhammadK is on a distinguished road
Hi everyone!

I'm struggling to get a perfect mesh for my simulation, which is simulating flow around a square building inside a wind tunnel,using CFX.

This is my model:
-it's basically a box within a box.
-The small box (the building), I used add frozen
- While the big box, I used add material
http://img404.imageshack.us/img404/6016/48680222.jpg
I expected Ansys meshing to exclude the interior part of the building, and only mesh the surrounding. But as shown in the photo below, its meshes everything.
http://img853.imageshack.us/img853/386/88239343.jpg

I had also turned on inflation, I am planning to put inflation ini the surrounding of the building later.

Can anyone point out what went wrong?

Cheers!
MuhammadK is offline   Reply With Quote

Old   April 18, 2012, 09:22
Default
  #2
Super Moderator
 
diamondx's Avatar
 
Ghazlani M. Ali
Join Date: May 2011
Location: Tokyo, Japan
Posts: 1,385
Blog Entries: 23
Rep Power: 28
diamondx will become famous soon enough
because you mentioned add frozen for the small box, not sure how. anyway here is what i would have done:
Draw you building first.
Add the big box by drawing a square and extruding it. there you will select add frozen (while drawing the big box).then you will have to do a Boolean operation to subtract the small building
You can split you geometry for symmetry if you want less computational time and less time for mesh generation.
Can you attach your project ?
__________________
Regards,
New to ICEM CFD, try this document --> https://goo.gl/KAOIwm
Ali
diamondx is offline   Reply With Quote

Old   April 18, 2012, 09:45
Default
  #3
New Member
 
Muhammad K
Join Date: Apr 2012
Location: Sydney, Australia
Posts: 10
Rep Power: 13
MuhammadK is on a distinguished road
Hi Ali

Thanks for your response
What I have done is, I have created two boxes using the create>primitives>box
and arranging its positions by redefining their xyz coordinates.
I have uploaded the file for you here http://www.4shared.com/zip/rJBMZlHO/New_folder.html

Thanks!
MuhammadK is offline   Reply With Quote

Old   April 18, 2012, 10:02
Default
  #4
Super Moderator
 
diamondx's Avatar
 
Ghazlani M. Ali
Join Date: May 2011
Location: Tokyo, Japan
Posts: 1,385
Blog Entries: 23
Rep Power: 28
diamondx will become famous soon enough
as i expected boolean operation is missing. go to create > boolean > select big box for target and small box for tool.
Attached Images
File Type: jpg help.jpg (91.9 KB, 66 views)
__________________
Regards,
New to ICEM CFD, try this document --> https://goo.gl/KAOIwm
Ali
diamondx is offline   Reply With Quote

Old   April 18, 2012, 18:39
Default
  #5
New Member
 
Muhammad K
Join Date: Apr 2012
Location: Sydney, Australia
Posts: 10
Rep Power: 13
MuhammadK is on a distinguished road
Got it. Thanks mate

MuhammadK
MuhammadK is offline   Reply With Quote

Reply

Tags
design modeler, meshing issues

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to add OpenFoam in module environment smpark OpenFOAM 4 May 12, 2011 15:00
Transient post-processing, Time averaged pressure work Turbomachine CFX 1 January 3, 2011 18:01
work station power needed Greg Main CFD Forum 4 September 16, 2008 04:29
Project Advice Needed Kapil Main CFD Forum 6 September 4, 2006 09:00
Consultant needed to optimize an oblique diffuser. Paul Main CFD Forum 0 March 24, 2004 17:59


All times are GMT -4. The time now is 10:25.