[ANSYS Meshing] Reverse orientation option for periodic boundaries

Cobain83 · May 17, 2012, 06:10

hi,
is there in ansys meshing v14 an equal option for reverse orientation like in Gambit for periodic boundaries? I've linked my periodic faces with match control, but for OpenFOAM simulation it seems that I need those "reverse orientation" option to get it working.

Cobain

PSYMN · May 18, 2012, 12:45

I had no idea, so I asked around and got this back...

Quote:

Is he doing an arbitrary match? I would think he should be able to do this by changing how the LCS is defined. Might need a model to understand what he is trying to do...

Unless you can get someone else to help on CFD-Online, you should probably contact ANSYS Tech support (even students qualify for tech support). You just need to get your customer number from the license file... Even if you don't have access to the server that the license is on, you can see it thru the ANSLIC_ADMIN utility by clicking the option to Display the License Server Machine Information (top button). Your customer number is listed at the top...

Cobain83 · May 18, 2012, 13:43

I get help from another forum user. I have to reorder my mesh, respectively the periodic boundaries in OpenFOAM. I will try it on monday.
Thanks for your help

May 17, 2012, 06:10	Reverse orientation option for periodic boundaries	#1
Cobain83 New Member Join Date: Jan 2012 Posts: 2 Rep Power: 0	hi, is there in ansys meshing v14 an equal option for reverse orientation like in Gambit for periodic boundaries? I've linked my periodic faces with match control, but for OpenFOAM simulation it seems that I need those "reverse orientation" option to get it working. Cobain

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
Simulation of a single bubble with a VOF-method	Suzzn	CFX	21	January 29, 2018 00:58
Difficulty in calculating angular velocity of Savonius turbine simulation	alfaruk	CFX	14	March 17, 2017 06:08
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 04:05

May 18, 2012, 13:43		#3
Cobain83 New Member Join Date: Jan 2012 Posts: 2 Rep Power: 0	I get help from another forum user. I have to reorder my mesh, respectively the periodic boundaries in OpenFOAM. I will try it on monday. Thanks for your help