CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Mesh generation for brake drum with elliptical holes (http://www.cfd-online.com/Forums/ansys-meshing/100394-mesh-generation-brake-drum-elliptical-holes.html)

nsv23 April 25, 2012 01:39

Mesh generation for brake drum with elliptical holes
 
I am new to CFD domain and I need to generate tetra mesh for brake drum with elliptical holes in ICEM CFD. I know I asking for steps, I read the tutorials in the Help menu, but they just give the steps and don't explain much. I am very lost. Please help me, you don't have to spoon feed each and every thing to me, but at least tell me what I have do. Thanks

Gweher April 25, 2012 19:36

Quote:

Originally Posted by nsv23 (Post 356792)
I know I asking for steps, I read the tutorials in the Help menu, but they just give the steps and don't explain much.

Can you be more specific about what you need, I mean you're asking for "steps" and complain that the tutorials just give you steps so I don't quite get your needs. Tutorials help you really to get started and understand the basic things by yourself. You can deduce lot of things on your own and if you have more "specific" questions just hit the search tab on the forum ;)

If your facing problems with your meshing strategy, be specific and don't forget "a picture is worth a thousand words"...


All times are GMT -4. The time now is 15:31.