CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Importing ICEM-generated geometry into DesignModeller for 2-way FSI (http://www.cfd-online.com/Forums/ansys-meshing/100411-importing-icem-generated-geometry-into-designmodeller-2-way-fsi.html)

user_of_cfx April 25, 2012 06:33

Importing ICEM-generated geometry into DesignModeller for 2-way FSI
 
Hello.

I have just started using Workbench in order to attempt a 2-way FSI simulation.

The question is:
- Can I import geometry that I made with ICEM into DesignModeller and then go on setting up my FSI simulation from there? If yes, are there some extra steps I need to make to create a solid and fluid body as in the tutorials?

(Pointing me to the right tutorial in the help may be all that is needed)


I have been using ICEM CFD to generate geometries and meshes for a very long time, so it would save me a lot of time if I could build my geometries there and avoid having to learn how to build the geometry inside DM at the present time.

Many thanks!
Christa


All times are GMT -4. The time now is 04:23.