CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Error: cannot remove all faces from a body

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 25, 2012, 12:20
Default Error: cannot remove all faces from a body
  #1
Member
 
James Willie
Join Date: Mar 2009
Posts: 67
Rep Power: 7
jwillie2000 is on a distinguished road
Hi All,

I am new to ansys meshing and i am tryign to mesh a heat exchanger using the Fill option. I select all surfaces and then deselect the outer surfaces. The trobule i am having is with the fins that have a helical shape of thickness of about 0.15mm. I leave them like that (that is without deselecting any of their sufaces since the surfaces on both sides are seeing the the air flow through the channel) in the channel but the fill option to help me extract the fluid volume is not working because of them. Not sure how to work about this problem. Any help or suggestion would be appreciated.

Jimmy
jwillie2000 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 2 November 25, 2012 08:54
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
DecomposePar unequal number of shared faces maka OpenFOAM Pre-Processing 6 August 12, 2010 09:01
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 19:43


All times are GMT -4. The time now is 22:13.