CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] probleme of convergence (http://www.cfd-online.com/Forums/ansys-meshing/101453-probleme-convergence.html)

sami34 May 4, 2012 08:26

probleme of convergence
 
I treat the phenomenon of natural convection double diffusion for a mixture of air-h2o and air-co2 in a square cavity
for a number of Ra = 10 ^ 5 then L (length caractristique) = 0.3 m
the problem is:
the convergence in Fluent !
the programe rest calculated ...
then I think the problem is caused by the mesh
I tried several meshes but same result
pleas help me
************************************************** ********
Je traite le phénomène de la convection naturelle double diffusion pour un mélange air-h2o et air-co2 dans un cavité carré
pour un nombre de Ra = 10^5 donc L (longeur caractristique) = 0.3 m
le problème est :
la convergence dans Fluent !
le programe reste calcule...
alors Je pense que le problème est dû à le maillage
J'ai essayé plusieurs maillages mais toujour meme résultat
s.v.p aidez moi

sami34 May 5, 2012 08:20

???
 
where is the answer
:(

-mAx- May 7, 2012 02:39

if you tried with several mesh and you still have same convergence issues, then I would say it is not a mesh problem.
What gives you an check mesh?
I would try a simple convection problem on your mesh to see if your mesh is guilty


All times are GMT -4. The time now is 18:22.