CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] Import external geometry problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 16, 2012, 05:24
Post Import external geometry problem
  #1
New Member
 
Houman Tamaddon
Join Date: May 2012
Posts: 5
Rep Power: 13
Houman is on a distinguished road
Hi everybody, I have a simple problem which totaly confused me.
I have made 15 differenet parametric geometries in DesignModeler which are saved as DesignModeler file format ( *.agdb), the units of models are in micro meter. when I try to assemble them, I import them via Import External Geometry feature in a new design modeler. the first geometry is imported in micro meter but once I import the second one, the second one would be in millimeter, 1000 times of the original ones, so what does the problem originate from?!!!
Houman is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh and geometry import in cfx-pre Francesco CFX 7 May 30, 2012 09:04
Problem in k-eps turbulence code in complex geometry sontukaku Main CFD Forum 2 December 28, 2010 01:44
[Commercial meshers] gambit import mesh quality problem with checkmesh mrshb4 OpenFOAM Meshing & Mesh Conversion 0 December 26, 2010 14:17
vitual _ real deneb FLUENT 3 January 22, 2007 05:31
Problem with Virtual Geometry Sridhar FLUENT 4 August 20, 2002 11:05


All times are GMT -4. The time now is 04:05.