[DesignModeler] Dividing Geometry into Regions

mjaisit · March 1, 2013, 16:20

I am fairly new to Ansys, so this should be a simply answer. I am trying to model 2 rectangular regions in 2-D that are touching side by side. The plan is to fill one region with a material and the other with a separate material. I attached a simple paint drawing of what I am trying to create. When I try to create 2 surfaces from sketches i get the error saying that intersecting profiles are not allowed for 3D features. If anyone could give me a brief explanation of how to do it, it would be much appreciated.
Thanks!

diamondx · March 1, 2013, 17:23

draw all the lines you have there. then go to "create surface from edges" do it twice, for the surface on your left and on your right

March 1, 2013, 17:23		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	draw all the lines you have there. then go to "create surface from edges" do it twice, for the surface on your left and on your right big-bang likes this. __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] Paraview 3.98.0 does not update list of mesh regions	letzel	ParaView	6	April 19, 2021 15:57
[snappyHexMesh] multiple regions	Tobi	OpenFOAM Meshing & Mesh Conversion	56	March 29, 2020 04:53
Cad Model - Design parameters - Parts and Regions	crevoise	STAR-CCM+	1	January 29, 2013 07:52
Problem Importing Geometry ProE to CFX	fatb0y	CFX	3	January 14, 2012 19:42
2D geometry to 3D geometry	Sgonzalezg	ANSYS Meshing & Geometry	11	April 8, 2011 11:02