CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] ICEM Challenge - Wing mesh (http://www.cfd-online.com/Forums/ansys-meshing/102974-icem-challenge-wing-mesh.html)

Far June 7, 2012 11:39

ICEM Challenge - Wing mesh
 
1 Attachment(s)
Here is the geometry of typical tapered wing. Every one is invited to participate in this challenge. I will show you my mesh soon.

BrolY June 8, 2012 04:10

You have already given the .blk file inside your .zip file lol ;)

Far June 8, 2012 04:12

It is just blocking with few splits. no association and anything else. :D.

I guess it is very much difficult to block this wing with quality.

everdimension June 8, 2012 06:53

A screenshot of initial geometry would attract and entice more ;)

Far June 8, 2012 07:12

Quote:

entice more
Are you talking of screen shot of jenefer lopez on the floor :D

everdimension June 8, 2012 07:13

)))) well, if your wing geometry has the same effect it certainly wouldn't hurt ))

Far June 8, 2012 07:17

Ok. I shall place a screen shot today.

diamondx June 8, 2012 09:17

is there a price ? ;)

Far June 8, 2012 11:20

Yes. You will get job at Far Inc.

cfd seeker June 27, 2012 11:14

have you managed to get good blocking for this geometry?

Far June 27, 2012 11:14

yes.............

cfd seeker June 27, 2012 11:21

Great......kindly place your blocking files here so that others can take benefit from it


All times are GMT -4. The time now is 09:13.