CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] 2d mesh problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 9, 2012, 10:46
Default 2d mesh problem
  #1
New Member
 
tl
Join Date: May 2012
Posts: 12
Rep Power: 5
tdbbz is on a distinguished road
Hello all,

I am trying to set up piston motion with a bowl in Fluent. The 2d geometry consists of three parts-piston bowl,piston motion,squish space. These three parts are created in UG, then assembled together. I imported the assemble file into Ansys Meshing Tool. However, There is a wall missing in fluent between piston bowl and piston motion after meshing. Fluent created a wall between squish space and piston motion automatically. Anyone knows how to let fluent create the wall for boundary condition purpose between piston bowl and piston motion? Any reply would be appreciated.
tdbbz is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
Dynamic Mesh Problem. Tom Clark FLUENT 9 July 7, 2010 07:56
Gambit problems Althea FLUENT 21 February 6, 2001 08:05
Convergence problem when ustructured mesh is used. SangJin Ryu CD-adapco 3 October 5, 2000 20:26
Mesh Mignard FLUENT 2 March 22, 2000 06:12


All times are GMT -4. The time now is 20:18.