|
[Sponsors] |
[ICEM] Hexa-mesh wont convert to unstructured |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 10, 2016, 19:56 |
Hexa-mesh wont convert to unstructured
|
#1 |
New Member
Kishan Kansara
Join Date: Dec 2013
Posts: 1
Rep Power: 0 |
Hi, I am trying to export my mesh into FLUENT and I know that I need to convert it into an unstructured mesh. I have managed to do this with other geometries, particularly with a rectangular flow field but some reason I keep getting an error saying that "error opening mesh file". Also I have tried to save my mesh as a separate file and I also get an error saying "sorry, no mesh is loaded".
I have associated the top, bottom and curved inlet with the left, top and bottom edge of the block...leaving the right edge of the block to be associated with the right (outlet). I started my blocking by creating a C grid and splitting the block near the trailing edge of the aerofoil. After deleting the block with the aerofoil, I associated the remaining edges with the airfoil curves. I have also collapsed the block to the right of the aerofoil to enable an appropriate fit for the sharp trailing edge. After updating the mesh and setting parameters I have made a mesh like in the pictures but cannot seem to convert it into an unstructured mesh. Has anyone experienced this before and know a way around this. 1.jpg 2.jpg 3.jpg |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
[ICEM] Hexa dominant meshing | Pat84 | ANSYS Meshing & Geometry | 19 | December 2, 2015 17:20 |
[ANSYS Meshing] unstructured mesh on 3D airfoil | wali | ANSYS Meshing & Geometry | 9 | September 27, 2013 14:09 |
[ICEM] Why do I have to convert my mesh to an unstructured mesh? | iznish | ANSYS Meshing & Geometry | 1 | November 2, 2012 08:29 |
[ICEM] Just started unstructured mesh ! | diamondx | ANSYS Meshing & Geometry | 6 | September 5, 2012 07:15 |