CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] error analysis (http://www.cfd-online.com/Forums/ansys-meshing/103659-error-analysis.html)

despaired student June 22, 2012 11:37

error analysis
 
Hello,

does someone know what this error exactly means respectively what do I have to correct?


Running FLUENT V6 Interface Vers. 14.0.3

Creating a Fluent 3D mesh.
Computing connectivity for 20492266 cells.
100000 cells
200000 cells
300000 cells
400000 cells
500000 cells
600000 cells
700000 cells
800000 cells
900000 cells
1000000 cells
2000000 cells
3000000 cells
4000000 cells
5000000 cells
6000000 cells
7000000 cells
8000000 cells
9000000 cells
10000000 cells
11000000 cells
12000000 cells
13000000 cells
14000000 cells
15000000 cells
16000000 cells
17000000 cells
18000000 cells
19000000 cells
20000000 cells
21000000 cells
22000000 cells
Creating cell sections for 20492266 cells.
Checking mesh:
interior faces : 60687541
interior walls : 0
boundary faces : 1578514
Creating face section for 62266055 faces.
60687541 faces of part FLUID.
error writing to file
Done
Done with translation.

diamondx June 22, 2012 12:09

it can be disk space, access right to folder or try to change the name of the mesh.

Ananthakrishnan June 23, 2012 12:11

Try saving the project before creating the mesh file. It gives an error in case it cannot find a path to write the file.

PSYMN June 23, 2012 14:30

My guess is that it either doesn't have access to the folder (check write permissions) or it doesn't have the room (disk space) to put the file.

To test, create a very small mesh (a few hundred thousand elements) and try to output that.

despaired student June 25, 2012 05:40

Thank you all for your advise.

I tried again this time with a bigger harddisc and it worked.
At what phrase do you noticed that the free space is the problem?

Far June 25, 2012 06:00

Quote:

Originally Posted by despaired student (Post 368151)
Thank you all for your advise.

I tried again this time with a bigger harddisc and it worked.
At what phrase do you noticed that the free space is the problem?


error writing to file:D

despaired student June 27, 2012 05:44

I thought so but wasn't really sure that this definitely means "you don't have enough free space" ...

Thank you, again.

PSYMN June 27, 2012 11:57

We were not sure either. It was just a good likely guess. ;)


All times are GMT -4. The time now is 07:46.