CFD Online URL
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[GAMBIT] problem with creating two seperate volumes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 23, 2012, 12:17
Default problem with creating two seperate volumes
  #1
New Member
 
Abhinav
Join Date: Oct 2011
Posts: 2
Rep Power: 0
abhinavkolla89 is on a distinguished road
I am creating two annular cylinders...the inner radius of the outer cylinder being equal to the outer radius of the inner cylinder...
inner cylinder dimensions,r1 = 0.2 , r2 = 0.5
outer cylinder dimensions,r3 = 0.5 , r4 = 0.8

now i want them to be in thermal contact but do not wish to merge/unite them as they are of seperate material i.e i want them to be as seperate volumes and be in contact for heat flow...when i created them by just using the radiuses specified and doing the boolean operations to generate the annular cylinders and simulated them in fluent (energy equation involved)...the temp profile is as shown.....which clearly indicates they are not in contact.

plz help
Attached Images
File Type: png ughdgh.PNG (12.9 KB, 5 views)
abhinavkolla89 is offline   Reply With Quote

Old   June 25, 2012, 02:08
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,861
Rep Power: 29
-mAx- will become famous soon enough
yep your disk aren't connected, so the solver understand there are walls between your disks (check the BL, I am pretty sure you will see walls between annular cylinders)
So you need to do some splits:
Create a disk with r=0.8
Create a circle with r= 0.2
Split the disk with the r=0.2 circle, and delete the r=0.2 disk which has been created
You have now a disk with r=0.2 hollowed disk
Now create a circle with r=0.5, and split the previous disk with this r=0.5 circle.
That's it: you have to distinct connected disks, on which you may apply different set-up
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem meshing two interacting volumes banerji OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 0 December 14, 2009 16:59
Creating control volumes jsaelices STAR-CCM+ 4 October 19, 2009 13:50
problem in creating parts in ICEM alastormoody11 ANSYS Meshing & Geometry 1 August 13, 2009 10:04
Importing nodal data and creating volumes and mesh milton FLUENT 0 June 25, 2008 10:37
problem in CFX solver about isolated volumes Yuan CFX 2 August 16, 2004 23:54


All times are GMT -4. The time now is 18:10.