CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[DesignModeler] pipe geometry variation modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 26, 2012, 06:21
Post pipe geometry variation modeling
  #1
New Member
 
Anonymous
Join Date: Jun 2012
Posts: 1
Rep Power: 0
timi-kun is on a distinguished road
Hi everyone,

I have some difficulty in modeling a pipe's geometry. Its a pipe elbow of 146mm diameter and 365mm radius bend which I have drawn using exturde and sweep respectively, but my problem is how to vary the pipe diameter in 3D to show the geometric change of the pipe thickness by 14.6% increase added to the pipe's extrados and 25% decrease substracted at the intrados of the pipe.
timi-kun is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modeling Propeller Geometry in STAR CCM+ 3D-CAD tava.amitava STAR-CCM+ 16 October 25, 2021 08:45
[DesignModeler] DesignModeler Pipe within pipe shields ANSYS Meshing & Geometry 13 November 25, 2018 23:14
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
modeling fluid in pipe hamid1 FLUENT 1 September 8, 2011 07:59
How to creat the geometry of a tapered pipe? Lee Siemens 2 September 1, 2003 11:36


All times are GMT -4. The time now is 19:17.