CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] convert a structured multiblock grid to an one unstructured (http://www.cfd-online.com/Forums/ansys-meshing/104190-convert-structured-multiblock-grid-one-unstructured.html)

Mirage July 4, 2012 12:20

convert a structured multiblock grid to an one unstructured
 
Hello,

I want to convert a structured multiblock grid to an one unstructured .

How can i do it ? do i have to use a special method, to solve the problem ?

SOS-Help !!

djfanf July 5, 2012 13:39

Hey

which software do you use to create the grid ? Give more information if you want an appropriate answer ;-)

Mirage July 6, 2012 05:12

Quote:

Originally Posted by djfanf (Post 369959)
Hey

which software do you use to create the grid ? Give more information if you want an appropriate answer ;-)

Thank you for your answer. :)
i use " ICEM " to create the grid.

Far July 6, 2012 05:37

Right click on premesh and choose the option convert to unstructured mesh.

Mirage July 11, 2012 11:36

Quote:

Originally Posted by Far (Post 370055)
Right click on premesh and choose the option convert to unstructured mesh.

thanks :):)

I tested it. It works :)

However my cells (points) were differently classed in comparison with the cells by structured grid.

I want to convert the grid without any modification of the point coordinate.

Should i choose a particular Setup ?


All times are GMT -4. The time now is 23:08.