CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Question about creating lateral surface for a specific geometry (http://www.cfd-online.com/Forums/ansys-meshing/104537-question-about-creating-lateral-surface-specific-geometry.html)

lnk July 11, 2012 17:01

Question about creating lateral surface for a specific geometry
 
1 Attachment(s)
Hi,

May I ask why I can't create the lateral surface of this geometry by the button 'simple surface'? And how to fix this problem? Btw, the upper side of the edge of this geometry is not round but the lower side is.

Best regards and many thanks,
lnk

BrolY July 12, 2012 03:43

Sometimes, this option doesnt work very well, but I don't know why.
Anyway, instead of using the method "from 2-4 curves", use the method "from curves". This method works better than this other ;)

lnk July 12, 2012 06:14

Quote:

Originally Posted by BrolY (Post 371013)
Sometimes, this option doesnt work very well, but I don't know why.
Anyway, instead of using the method "from 2-4 curves", use the method "from curves". This method works better than this other ;)


Thank you very much. It works.


All times are GMT -4. The time now is 11:06.