CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] meshing problem due to new name selection (http://www.cfd-online.com/Forums/ansys-meshing/105052-meshing-problem-due-new-name-selection.html)

nipunkothare July 21, 2012 13:27

meshing problem due to new name selection
 
i had to really fight it out with some issues that were coming due to inflation and finally completed the meshing successfully.
but when i tried to name it and update the mesh gave an error!! i know it is a very wierd thing to happen any solutions? thank you in advance.
p.S- i cant repeat the mesh i need to name it without making any changes in the settings

nipunkothare July 21, 2012 14:38

An error occured during sweeping while meshing the following face. Change element sizing parameters and try again.
this error is occuring is inflation of a semi cylindrical disk sweep body . i tried many max thicknesses but none work .the error geometry is coming as surface along the th path. any sggestions please very urgent


All times are GMT -4. The time now is 02:37.