CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] meshing problem due to new name selection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 21, 2012, 13:27
Default meshing problem due to new name selection
  #1
New Member
 
Join Date: Jul 2012
Posts: 5
Rep Power: 5
nipunkothare is on a distinguished road
i had to really fight it out with some issues that were coming due to inflation and finally completed the meshing successfully.
but when i tried to name it and update the mesh gave an error!! i know it is a very wierd thing to happen any solutions? thank you in advance.
p.S- i cant repeat the mesh i need to name it without making any changes in the settings
nipunkothare is offline   Reply With Quote

Old   July 21, 2012, 14:38
Default
  #2
New Member
 
Join Date: Jul 2012
Posts: 5
Rep Power: 5
nipunkothare is on a distinguished road
An error occured during sweeping while meshing the following face. Change element sizing parameters and try again.
this error is occuring is inflation of a semi cylindrical disk sweep body . i tried many max thicknesses but none work .the error geometry is coming as surface along the th path. any sggestions please very urgent
nipunkothare is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with querying the meshing database in CFX-Pre ashtonJ CFX 4 August 15, 2014 20:55
Stability problem due to turbulent dispersion force in a subcooled boiling model Edy OpenFOAM 7 August 10, 2011 12:00
[ICEM] ICEM meshing problem xyq102296 ANSYS Meshing & Geometry 6 October 28, 2010 10:09
problem with gambit unsymmetrical meshing meenakshi FLUENT 1 March 28, 2008 13:46
ICEM meshing problem Forrest CFX 4 May 25, 2005 18:37


All times are GMT -4. The time now is 18:38.