CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Why I can't generate the fluid-porous interface for this case (http://www.cfd-online.com/Forums/ansys-meshing/105418-why-i-cant-generate-fluid-porous-interface-case.html)

Anna Tian July 30, 2012 14:06

Why I can't generate the fluid-porous interface for this case
 
2 Attachment(s)
Hi

You can find my case at the attachment. From the attached picture, you can see that when I try to create a fluid-porous interface, I can't find a surface at the location list of my porous domain. So I can't create a fluid-porous interface. May I ask why and how to make it work?

By the way, since the cfx5 and the mesh file are too large, I can't upload them. You can easily generate them from my block. Then you can test it by CFX-pre to see my problem.


All times are GMT -4. The time now is 21:50.