CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Why I can't generate the fluid-porous interface for this case

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 30, 2012, 14:06
Exclamation Why I can't generate the fluid-porous interface for this case
  #1
Senior Member
 
Anna Tian's Avatar
 
Meimei Wang
Join Date: Jul 2012
Posts: 492
Rep Power: 7
Anna Tian is on a distinguished road
Hi

You can find my case at the attachment. From the attached picture, you can see that when I try to create a fluid-porous interface, I can't find a surface at the location list of my porous domain. So I can't create a fluid-porous interface. May I ask why and how to make it work?

By the way, since the cfx5 and the mesh file are too large, I can't upload them. You can easily generate them from my block. Then you can test it by CFX-pre to see my problem.
Attached Images
File Type: jpg Untitled.jpg (41.7 KB, 5 views)
Attached Files
File Type: zip test3.zip (15.5 KB, 2 views)
__________________
Best regards,
Meimei
Anna Tian is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
modeling the fluid flow in porous media by Fluent Mohsen Nazari FLUENT 3 November 17, 2014 08:53
Interface between fluid domain and porous domain windhair CFX 5 September 5, 2013 20:45
Fluid Solid Interface in Fluent saisanthoshm88 FLUENT 2 July 17, 2012 05:31
Free surface boudary conditions with SOLA-VOF Fan Main CFD Forum 10 September 9, 2006 12:24
porous media: Fluent or Star-CD? Igor Main CFD Forum 0 December 5, 2002 16:16


All times are GMT -4. The time now is 10:31.