[ANSYS Meshing] Relevance and Relevance Center

siw · August 9, 2012, 03:13

Hi,

I've some queries about the relevance features in ANSYS Meshing (AM). There are 3 options for the Relevance Center (RC) of Coarse, Medium and Fine and a numerical range for the Relevance (R) of -100 to 100. As I use CFX by default AM sets RC = Coarse and R = 0. So if I want to globally refine a mesh by a factor, of lets say 1.5, as part of a mesh independence study what would be the correct settings for the RC and R? The User Guides do not explain how these work. Also how do they work when compared to the ICEM Global Element Scale Factor (which simply multiples mesh sizings by a factor e.g. 1.5)?

To me it seems strange to have 2 parameters (RC and R) when a single scaling factor would be more sensible and intuitive.

Of course, the other option is to ignore RC and R and change every sizing manually but is more time consuming.

Thanks.

engineer.iman · September 3, 2014, 23:36

i have the same question, i want to know what is the impact of each of the RC options on my mesh!!! the guide says nothing about that!!!

yahmed · June 6, 2016, 16:31

I was looking into the same question and I found this document. Slide#9 clarifies a little bit what the difference between relevance center and relevance. I hope this help!
http://perso.crans.org/epalle/M2/MFN...h_Controls.pdf

Turbulenc_342 · April 12, 2018, 06:05

Quote:

Originally Posted by yahmed

I was looking into the same question and I found this document. Slide#9 clarifies a little bit what the difference between relevance center and relevance. I hope this help!
http://perso.crans.org/epalle/M2/MFN...h_Controls.pdf

Hi Yahmed,

Iam also have the same question. Could you please give permission to download the pdf document.

August 9, 2012, 03:13	Relevance and Relevance Center	#1
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 733 Rep Power: 25	Hi, I've some queries about the relevance features in ANSYS Meshing (AM). There are 3 options for the Relevance Center (RC) of Coarse, Medium and Fine and a numerical range for the Relevance (R) of -100 to 100. As I use CFX by default AM sets RC = Coarse and R = 0. So if I want to globally refine a mesh by a factor, of lets say 1.5, as part of a mesh independence study what would be the correct settings for the RC and R? The User Guides do not explain how these work. Also how do they work when compared to the ICEM Global Element Scale Factor (which simply multiples mesh sizings by a factor e.g. 1.5)? To me it seems strange to have 2 parameters (RC and R) when a single scaling factor would be more sensible and intuitive. Of course, the other option is to ignore RC and R and change every sizing manually but is more time consuming. Thanks. engineer.iman, Moustafa AL-Damook and Garvit like this.

September 3, 2014, 23:36		#2
engineer.iman Member Iman Join Date: Nov 2013 Posts: 37 Rep Power: 12	i have the same question, i want to know what is the impact of each of the RC options on my mesh!!! the guide says nothing about that!!! Moustafa AL-Damook likes this.

June 6, 2016, 16:31		#3
yahmed New Member Join Date: Jan 2014 Posts: 18 Rep Power: 12	I was looking into the same question and I found this document. Slide#9 clarifies a little bit what the difference between relevance center and relevance. I hope this help! http://perso.crans.org/epalle/M2/MFN...h_Controls.pdf Anyan, jyothsna k, arsenis and 1 others like this.