CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] need to find Linked edge (http://www.cfd-online.com/Forums/ansys-meshing/105806-need-find-linked-edge.html)

anc August 9, 2012 09:29

need to find Linked edge
 
Hello, I have a very complex blocking done by an ex employee. I am getting negative cells in the pre-mesh.
I found locations, this is due to small height elements near boundary, Now I am trying to increase the height near the Boundary but the spacing 2 is linked to some other edge in the geometry. Is there any way to find the linked edge?
can't find it in GUI (it is not highlighted)

Far August 9, 2012 10:00

you can delete that association or linking

Far August 9, 2012 11:56

Procedure is explained in following pics... If you still have some questions, dont hesitate to ask.


http://img204.imageshack.us/img204/201/15134428.png

http://img545.imageshack.us/img545/9927/45761360.png

http://img809.imageshack.us/img809/8619/78767106.png

http://img853.imageshack.us/img853/6387/11261400.png


All times are GMT -4. The time now is 09:51.