CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] ICEM CFD create mesh for OpenFoam cyclic

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 14, 2012, 06:58
Default ICEM CFD create mesh for OpenFoam cyclic
  #1
New Member
 
Join Date: Aug 2012
Posts: 1
Rep Power: 0
danilo is on a distinguished road
i have a cylinder cut with angle 6 degrees. the both side boundaries SYM1, SYM2 are from wedge type right now. I want to combine and create cyclic patch from them.

but after running createPatch tool (with appropriate createPatchDict) Im getting the error message, like many in the forum. Many users say that
all faces should be linked correctly,( for ex. Reverse orientation switch in Gambit have to be ON), but HOW TO DO THIS IN ICEM CFD?

The Error im getting is:


- face 1504 area does not match neighbour 87306 by 7.1892% -- possible - -- face ordering problem.
- patch:SYM my area:5.21392e-08 neighbour area:4.85209e-08 matching - -- tolerance:1e-06
- Mesh face:430832 vertices:4((0.00871393 0.00582281 0.000305161) - ---- (0.00871391 0.00605422 0.000317289) (0.00848935 0.00614575 - - 0.000322086) (0.00848938 0.00591339 0.000309908))
- Neighbour face:516634 vertices:4((0.0141839 0.00512173 -0.000268419) (0.0141839 0.00531677 -0.000278639) (0.0144322 0.00531745 -0.000278675) (0.014432 0.005122 -0.000268433))
Rerun with cyclic debug flag set for more information.
danilo is offline   Reply With Quote

Reply

Tags
ansys, cyclic, icem, openfoam

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import Mesh from ICEM CFD to CFX Andre Almeida CFX 16 April 19, 2016 04:42
Icem CFD mesh grading issue joegi.geo ANSYS Meshing & Geometry 7 March 8, 2011 19:26
Actuator disk model audrich FLUENT 0 September 21, 2009 08:06
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 02:07
----------------2D mesh with ICEM CFD Abir FLUENT 2 September 13, 2008 00:55


All times are GMT -4. The time now is 00:59.