CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Delaunay Meshing Error (http://www.cfd-online.com/Forums/ansys-meshing/105933-delaunay-meshing-error.html)

zstratto August 13, 2012 13:36

Delaunay Meshing Error
 
Hi, I have a surface mesh that I got from an Octree mesh. I have smoothed it and checked it; I get no errors. Then I try to fill with Delaunay and I have a problem, it comes back with this error:

***** checking faces *****
***** initial mesh *****
ERR 2012: can not insert point near (1.6913,2.57,-0.18573)
ERR 2012: can not insert point near (1.6913,2.57,-0.15837)
ERR 2012: can not insert point near (1.6913,2.94,-0.15837)
ERR 2012: can not insert point near (1.71522,2.97335,0)
ERROR:2002 - nbelim initial points cannot be inserted
status 1
Application did not finish correctly.

What does this mean? I have tried searching, but I can't find anything about it. These points are just seemingly random points on a curve between 2 surfaces, I attached some pictures if it helps. Thanks!

http://imageshack.us/photo/my-images/600/tri2teterror.png/
http://imageshack.us/photo/my-images...teterror2.png/


All times are GMT -4. The time now is 06:06.