CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Meshing a 3D airfoil using ICEM (http://www.cfd-online.com/Forums/ansys-meshing/106059-meshing-3d-airfoil-using-icem.html)

Julian121 August 17, 2012 03:41

Meshing a 3D airfoil using ICEM
 
I need to mesh a 3D airfoil using ICEM. I have created the geometry using ANSYS but I have never used ICEM before.

Could you tell me how I can mesh that using ICEM?

I would appreciate if you could help me.

Geometry link:
http://www.sendspace.com/file/pb9xdq

nitinbansal184 August 17, 2012 04:18

Quote:

Originally Posted by Julian121 (Post 377456)
I need to mesh a 3D airfoil using ICEM. I have created the geometry using ANSYS but I have never used ICEM before.

Could you tell me how I can mesh that using ICEM?

I would appreciate if you could help me.

Geometry link:
http://www.sendspace.com/file/pb9xdq


If you really wants to put your airfoil in ICEM then you need to airfoil coordinate file

Import these coordinate and join them by using spline..
Then make C-grid to do meshing task

cfd seeker August 17, 2012 11:31

Quote:

Originally Posted by Julian121 (Post 377456)
I need to mesh a 3D airfoil using ICEM. I have created the geometry using ANSYS but I have never used ICEM before.

Could you tell me how I can mesh that using ICEM?

I would appreciate if you could help me.

Geometry link:
http://www.sendspace.com/file/pb9xdq

http://www.cfd-online.com/Forums/ans...mesh-wing.html
this link is showing a thread in which detailed discussion about different blocking typologies is given

http://www.youtube.com/watch?v=mgjRT...ature=youtu.be
this video is tutorial for structured hexa meshing for wing

I hope both these things will help you alot

cfd seeker August 17, 2012 11:32

If you still require more after this I will be happy to help you :)

brijeshdubey11 August 17, 2012 11:52

If you want to create a wing. then just import .dat file of airfoil co-ordinates. it will automatically create curves and similarly import another one and transform it in the z direction then make two lines one joining leading edge point of both while other at trailing edge. and then create surface. after that proceed to blocking.


All times are GMT -4. The time now is 19:04.