CFD Online URL
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Meshing a 3D airfoil using ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 17, 2012, 04:41
Question Meshing a 3D airfoil using ICEM
  #1
New Member
 
Join Date: Aug 2012
Posts: 25
Rep Power: 4
Julian121 is on a distinguished road
I need to mesh a 3D airfoil using ICEM. I have created the geometry using ANSYS but I have never used ICEM before.

Could you tell me how I can mesh that using ICEM?

I would appreciate if you could help me.

Geometry link:
http://www.sendspace.com/file/pb9xdq
Julian121 is offline   Reply With Quote

Old   August 17, 2012, 05:18
Default
  #2
New Member
 
nitin bansal
Join Date: Jun 2012
Location: INDIA
Posts: 27
Rep Power: 4
nitinbansal184 is on a distinguished road
Quote:
Originally Posted by Julian121 View Post
I need to mesh a 3D airfoil using ICEM. I have created the geometry using ANSYS but I have never used ICEM before.

Could you tell me how I can mesh that using ICEM?

I would appreciate if you could help me.

Geometry link:
http://www.sendspace.com/file/pb9xdq

If you really wants to put your airfoil in ICEM then you need to airfoil coordinate file

Import these coordinate and join them by using spline..
Then make C-grid to do meshing task
nitinbansal184 is offline   Reply With Quote

Old   August 17, 2012, 12:31
Default
  #3
Senior Member
 
Join Date: Mar 2011
Posts: 402
Rep Power: 10
cfd seeker is on a distinguished road
Quote:
Originally Posted by Julian121 View Post
I need to mesh a 3D airfoil using ICEM. I have created the geometry using ANSYS but I have never used ICEM before.

Could you tell me how I can mesh that using ICEM?

I would appreciate if you could help me.

Geometry link:
http://www.sendspace.com/file/pb9xdq
Structured Hexa Mesh on Wing
this link is showing a thread in which detailed discussion about different blocking typologies is given

http://www.youtube.com/watch?v=mgjRT...ature=youtu.be
this video is tutorial for structured hexa meshing for wing

I hope both these things will help you alot
cfd seeker is offline   Reply With Quote

Old   August 17, 2012, 12:32
Default
  #4
Senior Member
 
Join Date: Mar 2011
Posts: 402
Rep Power: 10
cfd seeker is on a distinguished road
If you still require more after this I will be happy to help you
cfd seeker is offline   Reply With Quote

Old   August 17, 2012, 12:52
Default
  #5
New Member
 
brijeshdubey11's Avatar
 
brijesh dubey
Join Date: Nov 2011
Location: new delhi
Posts: 7
Rep Power: 5
brijeshdubey11 is on a distinguished road
If you want to create a wing. then just import .dat file of airfoil co-ordinates. it will automatically create curves and similarly import another one and transform it in the z direction then make two lines one joining leading edge point of both while other at trailing edge. and then create surface. after that proceed to blocking.
brijeshdubey11 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] complex 2D meshing on ICEM kassab ANSYS Meshing & Geometry 26 April 14, 2014 22:02
[ANSYS Meshing] ICEM Meshing :specified nodes along curve did not appear syler3321 ANSYS Meshing & Geometry 3 June 13, 2012 16:45
[ICEM] 2d Aerofoil meshing in ansys ICEM syler3321 ANSYS Meshing & Geometry 2 February 3, 2012 02:59
[Other] Ansys meshing airfoil and / or compressor blades baw192 ANSYS Meshing & Geometry 8 September 23, 2011 01:43
ICEM meshing question gsbhatia89 ANSYS Meshing & Geometry 5 June 14, 2010 09:24


All times are GMT -4. The time now is 13:50.