CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] How to create two or three zones with ICEM? (http://www.cfd-online.com/Forums/ansys-meshing/106090-how-create-two-three-zones-icem.html)

Touré August 17, 2012 22:26

How to create two or three zones with ICEM?
 
I want two or three fluid zones to use with Multiple Reference Frames in order to simulate a rotating machine such as centrifugal blower or a turbine. How to create different fluid zones or how the fluid zone could be sliced to obtain two or three different parts?

Touré August 18, 2012 20:47

Solved
 
1 Attachment(s)
I created two bodies: fluid1 and fluid2 (Geometry -> Create Body -> Material Point )

BrolY August 20, 2012 03:39

tetra or hexa mesh ?
which method ?
we need more info to help you ...

Touré August 20, 2012 21:21

Already solved. I didn't know that I had to create two bodies in order to get two fluid zones. Thank you.


All times are GMT -4. The time now is 01:44.