CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Conformal mapping in hybrid mesh (http://www.cfd-online.com/Forums/ansys-meshing/106113-conformal-mapping-hybrid-mesh.html)

sreekargomatam August 19, 2012 13:30

Conformal mapping in hybrid mesh
 
1 Attachment(s)
I'm trying to create a hybrid meshing for some dynamic meshing. It's the simulation of a spheroid oscillating inside a fluid medium. To do this, I created a structured mesh around the spheroid and in the rest of the domain. Unstructured mesh is sandwiched between these two structured regions. How much I may try, I'm not able to create a conformal mesh at the interface. A little help would be greatly appreciated.

Coris January 10, 2013 16:18

For 3D, the answer normally is Edit Mesh > Merge Node > Merge Meshes, as explained in the ICEM 11 tut man p458 (4.6.2 Hybrid tube)

For 2D (not this case, but if you're looking for it): see http://www.cfd-online.com/Forums/ans...ary-layer.html, especially the third post.


All times are GMT -4. The time now is 18:22.