CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Volume meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 20, 2012, 10:00
Default Volume meshing
  #1
New Member
 
Join Date: Aug 2012
Posts: 2
Rep Power: 0
PBruschi is on a distinguished road
Hi people.
I'm learning to use ICEM CFD and my teacher gave me a hard task (for me). I have a cylinder, and he wants a mesh but not a "constant" mesh. He would like if I could make , in one side of the surface, a larger mesh, and in the other side, a smaller. Also, in one side to the other, it should vary sweetly. Do you know what I mean? Well, I divided the surface in 4 surfaces and configured the sizes of each one, making a small size at one side and increasing it as it goes to the other side. Unfortunately, as the mesh goes to one surface to the other, the sizes change abruptly. I wonder if someone could give me a hand.
Thank you very much, Pedro.
PBruschi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
'Tetrahedral meshing has failed for volume...' Murat FLUENT 5 February 19, 2011 05:22
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 22:14
Meshing volume F.A. FLUENT 3 December 12, 2005 02:31
volume meshing nikita FLUENT 1 July 3, 2003 01:25
Patran Volume Meshing Deb CFX 19 April 17, 2003 10:56


All times are GMT -4. The time now is 16:57.