CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Gambit (http://www.cfd-online.com/Forums/ansys-meshing/107541-gambit.html)

upendra.shukla September 30, 2012 12:55

Gambit
 
Hi ,

In my gambit version there is no option of projection of point on edge but there is option of projection of edge on plane what i do for projecting point on edge?

Thanks in advance.

-mAx- October 1, 2012 07:00

what is your version?
http://aerojet.engr.ucdavis.edu/gamb...create_project

upendra.shukla October 1, 2012 08:06

Hi ,

Gambit version is 2.2.30.Here not available.

Thanks

-mAx- October 1, 2012 08:08

ok. can you post a picture to see how is it look like?

upendra.shukla October 1, 2012 09:55

Hi sir,

Here is the link of this version where u see it is not available in this version
http://202.118.250.111:8080/fluent/G...ide/mg0202.htm

-mAx- October 1, 2012 09:59

I mean how your geometry looks like ( which point do you want to project on which edge)

upendra.shukla October 1, 2012 10:06

Hi ,
I want to project end points of an arc on the edge.

-mAx- October 1, 2012 10:07

picture?
:)

upendra.shukla October 1, 2012 10:19

http://www.cfd-online.com/Forums/dat...AASUVORK5CYII=

upendra.shukla October 1, 2012 10:24

Quote:

Originally Posted by -mAx- (Post 384377)
picture?
:)

http://www.cfd-online.com/Forums/dat...AASUVORK5CYII=

upendra.shukla October 1, 2012 10:25

Quote:

Originally Posted by -mAx- (Post 384377)
picture?
:)

got the picture if not let me know your mail i will sent u the picture

upendra.shukla October 1, 2012 11:06

Hi,

I want to project end point of the circular arc (concave up )on the line lying horizontally below it.

Far October 1, 2012 14:30

Did you try this?

http://imageshack.us/a/img253/3568/42641457.png

upendra.shukla October 1, 2012 14:47

Hi sir,

It is not available in gambit version 2.2.30.Here projection of point on edge option not available.Here is the link of this version where u see it is not available in this version
http://202.118.250.111:8080/fluent/G...ide/mg0202.htm

Far October 1, 2012 14:55

upgrade gambit :)


All times are GMT -4. The time now is 10:05.