CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] multizone not creating volume mesh (http://www.cfd-online.com/Forums/ansys-meshing/108065-multizone-not-creating-volume-mesh.html)

diamondx October 13, 2012 17:52

multizone not creating volume mesh
 
Hello,
I have problem when using the 2d--3d fill.
when selecting cut plane, i can't see volume elements. is there a reason for that not to happen, i only get shell elements.
Other problem i have, if i select "ogrid", volume are only created in that ogrid i added (for boundary layer), other tetra are not created.
What am I missing. Everything was working good earlier this morning but not this afternoon...
Thanks.

Far October 14, 2012 02:12

What type of geometry you are trying with multi-zone method? Would you like to show us some pics where problem is occurring?

Quote:

Originally Posted by diamondx (Post 386460)
Hello,
Everything was working good earlier this morning but not this afternoon...
Thanks.

I guess, you are fresh in morning, so try it again next morning :D (and you are talking about the ICEM as well :p)

diamondx October 14, 2012 10:15

hummm, now that i think about it. i had two geometry in my folder. two different wing.
after changing the geometry, the multizone fill was working again. may be it's because of geometry.
Have you got any wing geometry there i can try again ?? or airplane ??
Thanks

Far October 14, 2012 11:28

wanna try naca 0012 wing?

cfd seeker October 14, 2012 11:52

Quote:

Originally Posted by diamondx (Post 386538)
hummm, now that i think about it. i had two geometry in my folder. two different wing.
after changing the geometry, the multizone fill was working again. may be it's because of geometry.
Have you got any wing geometry there i can try again ?? or airplane ??
Thanks

that's good that you have managed to learn multizone.....do teach us how you got it working because i struggled with it a lot...may be through a small video or pics. Thanks

diamondx October 14, 2012 13:02

@far shoot...
@cfd-seeker give me what you got as geometry,i guess you got a lot of wings there...
redbull stratos is airing right now... go watch !!

cfd seeker October 14, 2012 13:36

Quote:

i guess you got a lot of wings there...
hahahaha u r right....will give you tomorrow morning

cfd seeker October 14, 2012 13:44

2 Attachment(s)
here are the .tin files of two wings. 1st one is simple rectangular wing while 2nd is swept tapered wing

cfd seeker October 15, 2012 11:55

any updates?


All times are GMT -4. The time now is 21:41.