CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Take a lot of time for meshing (http://www.cfd-online.com/Forums/ansys-meshing/108127-take-lot-time-meshing.html)

chienfm October 15, 2012 10:51

Take a lot of time for meshing
 
1 Attachment(s)
Hi everybody,

I have a problem with my project that meshing always take a lot of time (more than 2 days for attach geometry). My hardware and meshing mode are following :

- Hardware : Xeon - 1230 3.3 Ghz , Ram 16 Gb, SSD - 128Gb ( 50 Gb remain )
- Meshsing : Proximity and Curvature at Medium Relevence Center
- The Geometry was created in solidwork.

Can you help me how to reduce meshing time. Any problem with my modeling ?

Thank you !

diamondx October 17, 2012 15:26

how many cells you get your mesh is generated. look at the unit, make sure you your sizing is not too small...


All times are GMT -4. The time now is 18:18.