CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

Ansys Fluent Mesh Inflation direction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 13, 2019, 04:40
Default Ansys Fluent Mesh Inflation direction
  #1
Member
 
Bineet Mehra
Join Date: Aug 2013
Posts: 61
Rep Power: 12
bineet_aero is on a distinguished road
Hello,

I am trying to simulate a very simple case of conjugate heat transfer. In the pic1 the geometry is shown which is a channel with three flow passages. When i insert inflation layers in ansys mesh, they get added to the solid part and not the air domain (pic2). In local inflation method, the geometry selected (scope) was the solid while in the "definition" solid faces were selected through which the air would pass. I want the layers in the flow channel. Please suggest. Thanks


pic1.png

pic2.jpg

Last edited by bineet_aero; September 13, 2019 at 06:40.
bineet_aero is offline   Reply With Quote

Old   September 16, 2019, 13:17
Default
  #2
New Member
 
Eduardo
Join Date: Mar 2018
Posts: 1
Rep Power: 0
Etnowar is on a distinguished road
I think you should change your scope geometry to fluid domain.

Regards
Etnowar is offline   Reply With Quote

Old   September 17, 2019, 04:15
Default
  #3
Member
 
Bineet Mehra
Join Date: Aug 2013
Posts: 61
Rep Power: 12
bineet_aero is on a distinguished road
Quote:
Originally Posted by Etnowar View Post
I think you should change your scope geometry to fluid domain.

Regards
Hi, thanks a lot. Selecting fluid domain in the "scope" renders the solid wall unavailable for selection in the "definition" tab.


Cheers
bineet_aero is offline   Reply With Quote

Reply

Tags
ansys fluent meshing, inflation layers

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to define a hole as boundary condition in Ansys Fluent using Fluent an mesh only? Nagu Sattenapalli CFD-Wiki 0 August 12, 2019 05:03
FLUENT adding mesh nodes problem when importing 3D mesh from ICEM guxin7005 FLUENT 2 June 27, 2016 22:41
Mesh deformation in ANSYS Fluent DDPM roopesh99 FLUENT 8 June 2, 2016 11:44
[ANSYS Meshing] ANSYS Fluent mesh export: nodes and edges Nereus ANSYS Meshing & Geometry 1 December 15, 2011 12:41
how to transfer a mesh from workbentch into fluent using ansys 12 0617157 ANSYS 2 March 21, 2010 15:07


All times are GMT -4. The time now is 11:53.