CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] meshing in icem cfd (http://www.cfd-online.com/Forums/ansys-meshing/108631-meshing-icem-cfd.html)

sut October 29, 2012 08:09

meshing in icem cfd
 
hello everybody..
i want to create a mesh for this problem. It is an hollow turbine blade. A fluid is flowing through it. Now i want to generate volumetric mesh both for the fluid flowing through the hollw blade and solid part of the blade.And both the meshes must be conforming.

Regards

Far October 29, 2012 08:29

Quote:

Originally Posted by sut (Post 389069)
hello everybody..
i want to create a mesh for this problem. It is an hollow turbine blade. A fluid is flowing through it. Now i want to generate volumetric mesh both for the fluid flowing through the hollw blade and solid part of the blade.And both the meshes must be conforming.

Regards

Thats good. You need blocking for the main blade then create o-grid inside and around the each cooling hole


All times are GMT -4. The time now is 06:47.