CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Meshing problem using ICEM CFD (http://www.cfd-online.com/Forums/ansys-meshing/108902-meshing-problem-using-icem-cfd.html)

cgpa4 November 4, 2012 13:02

Meshing problem using ICEM CFD
 
I am new in CFD and now working on meshing a multi element aerofoil. In ICEM CFD I have done mesh successfully. But. when I try to open it in Fluent it shows an error. It gives cell coordinate and tells no face is created. I do not know what to do.

Far November 4, 2012 13:13

If it is 2d problem, then it must on the x-y plane with z= 0

cgpa4 November 4, 2012 13:22

Meshing problem
 
it is a 2D problem and z=0.


All times are GMT -4. The time now is 20:01.