CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Cross check marks in my geometry for the mesh (http://www.cfd-online.com/Forums/ansys-meshing/109742-cross-check-marks-my-geometry-mesh.html)

rypersaud November 25, 2012 17:15

Cross check marks in my geometry for the mesh
 
1 Attachment(s)
hey guys hope you can help out with this. After I load my geometry and generated the mesh, there were cross check marks beside the bodies under the geometry part. I attached a picture to show. Any idea why they aren't just normal check marks or can I just ignore them?

Thanks for the help,
Ryan

Attachment 17223

akmenon July 24, 2015 05:55

Has anyone found the solution to this? I am stuck with the same problem.

Kapi July 26, 2015 19:00

It means body is meshed!
Click on "mesh" to see your mesh!


KAPI


All times are GMT -4. The time now is 00:24.