CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Cross check marks in my geometry for the mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 25, 2012, 17:15
Default Cross check marks in my geometry for the mesh
  #1
New Member
 
Ryan Persaud
Join Date: Nov 2012
Posts: 4
Rep Power: 4
rypersaud is on a distinguished road
hey guys hope you can help out with this. After I load my geometry and generated the mesh, there were cross check marks beside the bodies under the geometry part. I attached a picture to show. Any idea why they aren't just normal check marks or can I just ignore them?

Thanks for the help,
Ryan

mesh cross check mark.jpg
rypersaud is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
TranformPoints gives skewed mesh Possible Bug andersking OpenFOAM Mesh Utilities 3 March 25, 2008 22:33
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 16:08.