CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Help with meshing (http://www.cfd-online.com/Forums/ansys-meshing/110513-help-meshing.html)

Benrode December 13, 2012 01:38

Help with meshing
 
2 Attachment(s)
I will appreciate if anybody could come to my aid. I meshed this profile with surface meshing, as shown in the picture. I am not contented with the results.. However, I would have love to use the Blocking method but due to my limited knowledge. I have constraint because the top and bottom boundary is periodic so if I try to do blocking I get negative volume.I have to generate this boundary for different spacing.
Thank you.

energy382 December 13, 2012 09:01

upload .tin-file

Benrode December 13, 2012 15:25

1 Attachment(s)
Thank you for the response energy 382.

Pospelov January 18, 2013 05:42

1 Attachment(s)
Hello. In attach file you can find what you need. So you shold do boundary layer and a little bit improve sell disribution.
:D
Pospelov Alexander.

Benrode January 18, 2013 14:41

Thank you Pospelov, I am grateful.


All times are GMT -4. The time now is 17:26.