CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Can't get a conformal mesh between bodies

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 17, 2012, 16:54
Talking Can't get a conformal mesh between bodies
  #1
New Member
 
Join Date: Oct 2012
Posts: 2
Rep Power: 0
buxZED is on a distinguished road
I’m trying to solve a spar meshed with shell elements.

In order to get shell elements, I created 2D surfaces using “Surface from Face”surfaces form faces.jpg


I formed a new part to identify it as a one body form new part.jpg
But solution I get is wrong
final.jpg
Any help?


PS -

2D body
cross section.jpg

3D body
3d body.jpg
buxZED is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 05:25
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 04:24
[ICEM] Conformal mapping in hybrid mesh sreekargomatam ANSYS Meshing & Geometry 1 January 10, 2013 16:18
Conformal Mesh Jade M Main CFD Forum 3 March 18, 2010 13:10
conformal vs. non conformal mesh otho Main CFD Forum 2 May 30, 2008 11:11


All times are GMT -4. The time now is 12:27.