CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] how to reduce fine mesh in the centre of the hydrocyclone (http://www.cfd-online.com/Forums/ansys-meshing/110672-how-reduce-fine-mesh-centre-hydrocyclone.html)

veerukvb December 18, 2012 01:14

how to reduce fine mesh in the centre of the hydrocyclone
 
hi,

I got one mesh problem in the hydro cyclone. I used tetra/ hexa mesh for the hydro cyclone. I got the finer mesh at the hydro cyclone walls on both sides but I could not able to make coarse mesh at the centre of the hydro cyclone where the air core will be formed. I want to connect/ associate two edges which are in adjacent to each other. I found one option in blocking i.e there is a link edge. I used that option even though I could not connect the two edges. I used another option i.e I merge two blocks of respective edges, in that case I joined the two edges at the top of the pipe but I could not find the joint between the two edges at the bottom of the pipe. could help me regarding this query.


All times are GMT -4. The time now is 06:43.