[ICEM] 3d vof

Smaras · January 21, 2013, 06:58

Hello,

Need some some help i am working on 3D VOF simulation for EAF for my thesis work. I have worked with 2D meshing on ICEM and almost got good result special thanks to RodriguezFatz.

Now having trouble with 3D in grid independence.

So if anyone can help me in grid independence and better meshing (tetra+ prism meshing) of 3D cylinders.

Would be thankful for your reply.

Regards,

Smaras

Far · January 21, 2013, 09:12

Yes can be done. Now you have downloaded mesh refinement tool, you can try and come back if you get problems.

I usually use tgrid for the mesh refinement and ICEM for the surfaces mesh (either from octree or directly through shell meshing)

Smaras · January 21, 2013, 09:28

Quote:

Originally Posted by Far

Yes can be done. Now you have downloaded mesh refinement tool, you can try and come back if you get problems.

I usually use tgrid for the mesh refinement and ICEM for the surfaces mesh (either from octree or directly through shell meshing)

Thanks Far after searching a lot i found that. I'll do that then will come back to this forum.

Regards,

Smaras

January 21, 2013, 06:58	3d vof	#1
Smaras Member Smaras Join Date: Sep 2012 Location: Germany Posts: 78 Rep Power: 13	Hello, Need some some help i am working on 3D VOF simulation for EAF for my thesis work. I have worked with 2D meshing on ICEM and almost got good result special thanks to RodriguezFatz. Now having trouble with 3D in grid independence. So if anyone can help me in grid independence and better meshing (tetra+ prism meshing) of 3D cylinders. Would be thankful for your reply. Regards, Smaras

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem about VOF and species couple	Cloud	FLUENT	0	June 15, 2012 01:23
Question:Considerations about the evaporation in VOF	dokeun	FLUENT	10	February 24, 2011 20:47
plz rply urgent regrding vof model for my system	garima chaudhary	FLUENT	1	July 20, 2007 08:37
ATTENTION!! Validty of Fluent's VOF??	ozgur	Main CFD Forum	3	February 18, 2004 18:19
Difficult BCs about Freesurface Simulation by VOF	Yongguang Cheng	FLUENT	0	September 19, 2003 07:39

January 21, 2013, 09:12		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	Yes can be done. Now you have downloaded mesh refinement tool, you can try and come back if you get problems. I usually use tgrid for the mesh refinement and ICEM for the surfaces mesh (either from octree or directly through shell meshing)