|
[Sponsors] |
January 13, 2013, 14:37 |
meshing
|
#1 |
New Member
sara mehrdad
Join Date: Dec 2012
Posts: 11
Rep Power: 13 |
Hi;
i want to mesh by hex method on gambit distances between two cylinder that ones is elliptical tilt cylinder and second is circular cylinder,but i recieve error!!!please help me... thanks |
|
January 14, 2013, 02:28 |
|
#2 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
pictures always help
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 14, 2013, 03:55 |
|
#4 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
same picture but in (xy) plane to see distance between both small pipes
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 14, 2013, 04:13 |
|
#5 |
New Member
sara mehrdad
Join Date: Dec 2012
Posts: 11
Rep Power: 13 |
image2.png
dA1 is small surface element of circular cylinder and x=7.6m,distance x is between center of elliptic and center of circle tanks a lot |
|
January 14, 2013, 04:29 |
|
#6 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
Then extend both small pipes, and split volume with sweeped surfaces.
Then create 3 planes, and split volume into 4 pieces Start meshing with pipes Sans titre.png
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 19, 2013, 01:43 |
meshing
|
#7 |
New Member
sara mehrdad
Join Date: Dec 2012
Posts: 11
Rep Power: 13 |
thanks a lot for your help but i shouldnot extend pipes because of their dimensions!!!!
|
|
January 21, 2013, 02:24 |
|
#8 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
I didn't change pipe dimensions.. as you can see the hollow doesn't go through the whole domain.
I just extend the diameter of the pipe (topology), and this surface will be treated as interior, not as wall Sans titre.jpg
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 21, 2013, 12:18 |
meshing
|
#9 |
New Member
sara mehrdad
Join Date: Dec 2012
Posts: 11
Rep Power: 13 |
thanks for your help,maybe i should describe more about my problem,small pipes are wall and large cylinder is pressure farfeild,complete geometrry is consist of two small circular cylinders with D=3.8m&H=6.365m,distance between them is x=4.75m,third cylinder is elliptical&tilt cylinder H=8.596m&D1=4.686m&D2=3.0815m,rotate this cylinder 45 degree on negetive Z direction and translate y=8.1m,large cylinder treate as pressure farfeild with D=19m&H=16m,then i substract three small cylinedrs of large cylinder,i want to mesh by hex element this geometry but i cant!!!!
attachment images discribe my problem please see them thank a lot |
|
January 22, 2013, 02:00 |
|
#10 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
your geometry isn't the same as in your third post...
post other view of your geometryto see how small cylinders are "intercepting" together
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 22, 2013, 02:18 |
|
#11 |
New Member
sara mehrdad
Join Date: Dec 2012
Posts: 11
Rep Power: 13 |
i first create cylinders on pozitive Y axis location then make chenges.
|
|
January 22, 2013, 03:05 |
|
#12 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
then it will be challenging to mesh it with full hexa (that's my point of view)
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 24, 2013, 08:20 |
meshing error
|
#13 |
New Member
sara mehrdad
Join Date: Dec 2012
Posts: 11
Rep Power: 13 |
i try meshing by hex cooper element but recieve this error:
independent loop of swept faces on volume,volnme1 had mismatched intervals assigned and thus cannot be meshed using the cooper tool |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing | David-CFD | ANSYS Meshing & Geometry | 1 | April 1, 2011 06:22 |
Meshing locks workbench window. | andy2o | CFX | 0 | February 1, 2008 06:01 |
Singularity of grid?Volume meshing vs face meshing | Ken | Main CFD Forum | 0 | September 4, 2003 12:09 |
Volume Meshing & Face Meshing? singularity of grid | ken | FLUENT | 0 | September 4, 2003 12:08 |