|
[Sponsors] |
January 18, 2013, 09:17 |
Blocking Quarter Pipe with Chamfer
|
#1 |
New Member
Join Date: Jan 2013
Posts: 2
Rep Power: 0 |
Hi everybody,
I'm new into ICEM and have to generate a mesh for the following geometry: a quarter pipe with a chamfer. In future I will do some simulations regarding the fluid flow inside and outside the quarter pipes. Here's an image of my geometry: 'Cause of the cylindrical geometry I'm using quarter o-grid's. The problem are the chamfers located at the ends of the pipes: I created a quarter o-grid on the y-z-plane and on the x-z-plane but it seems that the mesh has to much distortion... The 2nd image shows my first approach to block the chamfer at the inner pipe (the green part) with an o-grid: ...and a pic showing the o-grid on the chamfer: Is there anybody who can give me some help regarding a blocking strategy? Hopefully there's a better way to fix it. I submit my generated files so far... Thanks in advance! |
|
January 18, 2013, 10:34 |
|
#2 |
Senior Member
AB
Join Date: Sep 2009
Location: France
Posts: 323
Rep Power: 21 |
You don't need the 2nd 1/4 of O-grid .. it looks like some edges got mixed up.
Don't do it, but associate the edges to the right curves, delete the "solid" blocks, and it should be good. EDIT : attached an example. Be careful to your geometry, there are many surfaces that you can delete (same with curves. Also, I added curves and points as a support to the blocking. Last edited by BrolY; January 18, 2013 at 10:53. |
|
January 18, 2013, 11:08 |
|
#3 |
New Member
Join Date: Jan 2013
Posts: 2
Rep Power: 0 |
Ah I see, your approach is simpler than mine. Thank you so much for the reply and the example! Think it will help me alot!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[DesignModeler] DesignModeler Pipe within pipe | shields | ANSYS Meshing & Geometry | 13 | November 25, 2018 22:14 |
[ICEM] blocking splined curve pipe | jyh3134 | ANSYS Meshing & Geometry | 9 | January 6, 2013 12:43 |
[ICEM] Blocking topology for pipe flow with a butterfly valve | siw | ANSYS Meshing & Geometry | 13 | November 27, 2012 12:07 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |