CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] problem in meshing (http://www.cfd-online.com/Forums/ansys-meshing/111934-problem-meshing.html)

tmeysam92 January 18, 2013 06:11

problem in meshing
 
2 Attachment(s)
Hello all,

I meshed the geometry(FIG.1) in ICEM CFD. but the mesh is not good(FIG.2).

How can I solve the problem.

thanks in advance.

tmeysam92 January 18, 2013 06:13

1 Attachment(s)
the tin and prj files are here.

Pospelov January 18, 2013 07:00

I've got only ANSYS 13. So can you export geimetry to IGES or STEP. :)
I've got some time and can help you.

Pospelov January 18, 2013 09:46

1 Attachment(s)
In attach file. You can find the solution of your problem.
Pospelov Alexander. :rolleyes:

tmeysam92 January 18, 2013 10:13

Quote:

Originally Posted by Pospelov (Post 402666)
In attach file. You can find the solution of your problem.
Pospelov Alexander. :rolleyes:

thenak very much.

i did not understand my mistake.
could you please teel me how can i fix my problem in meshing(FIG.2(previous status))

Pospelov January 18, 2013 10:28

So. In my file you can fine enother topology for your part. Look at it more carefully and you will see the defferece. :)

BrolY January 18, 2013 10:33

tmeysam92, you didn't add your .blk file in the archive. If you don't want to, you could post a picture of your blocking.
But it looks like either you didn't associate an edge, either you forgot to add a split .. not very easy to say without .blk file or picture of your blocking.

tmeysam92 January 18, 2013 14:21

1 Attachment(s)
Quote:

Originally Posted by BrolY (Post 402681)
tmeysam92, you didn't add your .blk file in the archive. If you don't want to, you could post a picture of your blocking.
But it looks like either you didn't associate an edge, either you forgot to add a split .. not very easy to say without .blk file or picture of your blocking.

thank you very much.
i attached tin,prj and blk files.


All times are GMT -4. The time now is 16:16.