[ICEM] problem in meshing

tmeysam92 · January 18, 2013, 05:11

Hello all,

I meshed the geometry(FIG.1) in ICEM CFD. but the mesh is not good(FIG.2).

How can I solve the problem.

thanks in advance.

tmeysam92 · January 18, 2013, 05:13

the tin and prj files are here.

Pospelov · January 18, 2013, 06:00

I've got only ANSYS 13. So can you export geimetry to IGES or STEP.

I've got some time and can help you.

Pospelov · January 18, 2013, 08:46

In attach file. You can find the solution of your problem.
Pospelov Alexander.

tmeysam92 · January 18, 2013, 09:13

Quote:

Originally Posted by Pospelov

In attach file. You can find the solution of your problem.
Pospelov Alexander.

thenak very much.

i did not understand my mistake.
could you please teel me how can i fix my problem in meshing(FIG.2(previous status))

Pospelov · January 18, 2013, 09:28

So. In my file you can fine enother topology for your part. Look at it more carefully and you will see the defferece.

BrolY · January 18, 2013, 09:33

tmeysam92, you didn't add your .blk file in the archive. If you don't want to, you could post a picture of your blocking.
But it looks like either you didn't associate an edge, either you forgot to add a split .. not very easy to say without .blk file or picture of your blocking.

tmeysam92 · January 18, 2013, 13:21

Quote:

Originally Posted by BrolY

tmeysam92, you didn't add your .blk file in the archive. If you don't want to, you could post a picture of your blocking.
But it looks like either you didn't associate an edge, either you forgot to add a split .. not very easy to say without .blk file or picture of your blocking.

thank you very much.
i attached tin,prj and blk files.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with querying the meshing database in CFX-Pre	ashtonJ	CFX	18	April 18, 2023 23:49
[Other] Hex meshing problem DM12	patrick	ANSYS Meshing & Geometry	7	January 9, 2015 07:21
Strange ANSYS Meshing 13.0 Problem	brunob	ANSYS Meshing & Geometry	3	June 21, 2011 20:03
Meshing problem in GAMBIT	Vidya Raja	FLUENT	0	May 20, 2006 23:31
GAMBIT meshing problem	Gauthier Lambert	Main CFD Forum	1	August 3, 2000 09:22

January 18, 2013, 06:00		#3
Pospelov Member Alexander Join Date: Nov 2009 Location: Blansko, Czech Republic Posts: 30 Rep Power: 16	I've got only ANSYS 13. So can you export geimetry to IGES or STEP. I've got some time and can help you.

January 18, 2013, 09:28		#6
Pospelov Member Alexander Join Date: Nov 2009 Location: Blansko, Czech Republic Posts: 30 Rep Power: 16	So. In my file you can fine enother topology for your part. Look at it more carefully and you will see the defferece.

January 18, 2013, 09:33		#7
BrolY Senior Member AB Join Date: Sep 2009 Location: France Posts: 323 Rep Power: 21	tmeysam92, you didn't add your .blk file in the archive. If you don't want to, you could post a picture of your blocking. But it looks like either you didn't associate an edge, either you forgot to add a split .. not very easy to say without .blk file or picture of your blocking.